Direct tv remote to visio tv

On your Visio TV remote control there will be a Source button or Input button. Press it & on your TV screen select HDMI 1 or HDMI 2. See the TV to see how the HDMI cable is connected from TV to Set Top Box. Now take the other remote control i.e. Sony Universal remote in your hand. Press mute & Select simultaneously. A blue light will blink twice, Immediately release the buttons & enter the code. You have to be extremely fast in doing this.
Following are few codes which you can try:
002, 000, 011, 080, 111, 006, 071, 128, 1904, 925, 0000, 0834, 0810, 1685, 1786, 1032, 1972.
Check the Visio TV manual for the make of your TV & model no & if code is printed. Then contact Visio TV manufacturer or retailer for the Visio TV code to enter & synchronize with the Sony Remote Control.

Use the RECOVER button to get back to watching satelliteprogramming if you accidentally change channels or inputs on your TV. Press POUND. Press & hold the TV Mode button until all Mode buttons light up. To take the remote out of Limited Mode, use the PAGE DOWN button instead of the PAGE UP button in step 2.


to download the User Guide - Dish Network

www.dish.com/downloads/tv.../2-Way_RC_UserGuide.pdf Dish Network
Feedback

Program Remote to TV/Other ' MyDISH ' DISH Customer ...

https://www.mydish.com/support/program-remote-to-tv

Hi, In the direct tv settings you have to set it back to the vizio, direct TV builds in this remote programming feature, of course the TV needs to be on showing the direct TV menu first,

I’m happy to help further over the phone at https://www.6ya.com/expert/eric_ab7c09ec01841771

Code 04 worked for my 42 Visio LCD, using the RMT-119A remote

Could be a tuner but a simple way to find out is DIRECT ENTER with the remote (numbers) a channel and hit enter---if it goes to missing channel you can manually in the menu with the remote ADD each missing channel one at a time--tedious but will rule the tuner out.

Almost every set made is able to add or delete channels one at a time.

We can't give you the code without specific model numbers for both the TV and remote control. Try the codes for the Visio models that are listed in the manual. There is a good chance that Visio used the same coding system for more than one model. If that doesn't work, check the Internet support page for your remote control. It may have additional models listed, and one may apply if Visio used one of the other remote control systems on the market at the time your remote control was manufactured.

Visio TV codes: 004 or 031

Turn on the TV
1. Press [TV] button and [SEL] button simultaneously for 3 sec.
2. Point the remote controll toward the TV and enter code.
TV will turn off when correct code has been entered.
3. Store the code by pressing [TV]

Direct Dish.... :p only outputs to your TV on channel 3 or 4. This leads to only using Direct's remote. I would suggest to try going over to DISH Network as their remote is much better and will work the TV......

U-verse remote control code 1004 provided the support I needed for my Visio VO37LHDTV10A 37 in. LCD TV

I bought a 42" Visio LCD from Costco and used code 10030 and it worked. It is the code for Goldstar TV.