ERROR 1203 LEXMARK ERROR 1200
Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...
1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy.
Or try
Reset Factory Defaults on the Dellâ„¢ 964 or 966 Printer
To reset factory defaults on the printer, perform the following steps:
1. Press the down arrow button until Maintenance is highlighted and press the Select button.
2. Press the down arrow button until Reset Defaults is hightlighted and press the Select button.
3. The printer displays a confirmation message. Highlight Yes and press the Select button
Note:
Some settings such as phone lists, time, date, and country are not changed.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
Steps To Fix An Error 1203 Error Of The Lexmark Printer
The Lexmark printer error 1203 appears on the operator panel by indicating a severe issue with one of the installed ink cartridges.
Steps to fix an error 1203 of Lexmark printer:
Step1: Power On process
Make sure that the Lexmark printer is accurately powered on.
Step2: Working with the control panel
·Pull up the control panel and then open the cartridge access door carefully. The print cartridge carrier will then move and stop automatically at the loading position.
Pull all the old cartridges and later on lift them out carefully.
Step3: Working with the cartridges
·With the cartridges shifted out of the printer, you need to shut the access door and then work with the control panel.
Power off the printerand then power it on again
Step4: Checking the operator
·Check for the operator panel to see whether the same error has returned or if can see a new message on the screen.
·
If the message displayed is 1203, there is something wrong with the printer hardware.
Step5: Installation phase of the cartridges
·Reinstallation of the cartridges into the printer is essential task for users as suggested by Lexmark printer technical support expert team.
·Insert the color cartridge accurately in the left carrier and then insert the black cartridge in the absolute right carrier.
·Push it back gently on the cartridges till it snaps securely into an accurate position.
·Close the entire cartridge access door as well as the control panel.
·If you still can see the 1203 errormessage on the operator panel, then it is advised to users to insert one cartridge at a time.
·With one cartridge in the carrier section, carefully close both the access door and the control panel.
·Check for the entire operator panel to see if the 1203 error is still displaying or not.
·If the Cartridge Missingmessage is being displayed, then the second cartridge may lead into the failure process.
·Replacement of the defective cartridge is necessary. Fix your Lexmark printer issues with our expert technicians at Lexmark printer customer support Toll-Free 1-800-213-8289 department for prompt solutions to your issue.
416 views
Usually answered in minutes!
×