What can I check on or do when getting a water outlet fault message on Asko w6641
Check the filter basket that catches waste from the washup. Also follow the outlet hose ( usually winds through cupboards to the sink outlet. ) and see there are no kinks in it from articles being pushed against it.
If these are OK it may be that ther outet valve is jammed and this will require a tech, as the whole casing will need removing
Please rate my help++++Thankis for using FIXYA
Testimonial: "Great, thanks for your help"
Hi
Your problem is most likely the fill solenoids.
Often, grit, sand and other 'stuff' in your water supply will cause the solenoids to stick open.
To repair, pull the washer away from the wall, so you can access the area where your water hoses attach to the washing machine. Turn the water off.
Disconnect the water hoses, allowing them to drain into a bucker. Identify the screws that go from the back of the washer into the item that the hoses attach to. Remove those screws and disconnect the hose(s) that go into the body of the washer. Remove the solenoid unit. Purchase a new solenoid.
Reverse the removal procedure.
Please get back to us if you have further query else please accept the suggestion.
Thank you for contacting fixya.com
297 views
Usually answered in minutes!
×