Blinking night light - Velodyne DPS-12 Subwoofer

What kind of night sentry light is it? Some you turn them off at the switch and wait 3 to 5 mins and turn back on. then set to auto?

4 times standby light blink shows that tv got problem in vertical deflection section and probably vertical output IC got defective, need to be replaced.
Replacement of parts in circuit board requires soldering work and expertise so call local tv repair shop guy if you are not familiar with soldering work.
Thanks.

If you have sound and no picture, it's time for a new lamp.

In the manual check under LED indication, It explains the blinking lights, unless your outside at night looking up!

GIVE IT A ******* REST ****** UR A NERD GAMER

Those blinks are fault codes. To know more visit the site linked here. http://electronicshelponline.blogspot.com/

i have the same problem

do you have now a good picture or not

The programs involved with you ringing are 81 ( no light or Day Mode ), 84 ( blinking red light or Day 2 Mode ), and 87 ( solid red light or Night Mode ). To change the ringing assignments you need to know the port numbers of the phones you want to ring or not ring. You can do this by pressing DN/ICM dialing # 4 0 2 at each phone, the diaplay will show the physical and logical port numbers. These numbers will be used to turn on or off the aaociated lamps within the above programs. Do you have anyone on staff that understands the system programming ? Let me know ...Mike

my jvc big scrreen worked just fine last night and this am i turned it on and the color is greena and red with double vision can you help

i hve the same problem. I turned on my Sharp Aquos lc-32d62u HDTV last night for the first time, but it is black and a blinking green light.
did you find a solution?