Wiring diagram for skullcandy headphones

Contact skullcandy they will replace it for you. i just sent mine out

Unfortunately the ear buds are not made to be repaired, your best option is take them back for replacement "hopefully they are under warranty"

SkullCandy headphones have a lifetime limited warranty (that's usually a 10 year warranty). You should be able to get it repaired by visiting this page and following the instructions: http://www.skullcandy.com/warranty-information.html
If you purchased them used or from a friend or something, or you don't have proof of purchase (if you bought them online you can usually print out a receipt from the e-tailer), then SkullCandy will probably not repair them for you [sucks, I know, but there's nothing I can do about that].

The SC-PRODJ4 is about $130. Best price I could find was on Amazon: http://www.amazon.com/o/ASIN/B001E1EV40/ebusinesslead-20

Good luck! Hopefully you can get your headphones repaired for free or cheap!

What typically happens is that the base of the wire gets stressed from wrapping the cord around your media player and it eventually breaks the copper wire inside of the insulation. You likely can not even see the damage, let alone repair it. Be more careful with the next set, and might I recommend a set of AKG ear buds. I use AKG studio headphones and bought my little sister some AKG ear buds, very impressive quality very close to my studio headphones. AKG K 313

Most likely they are defective, and you should take them back if
you have the receipt, or warranty.

the same thing happend to me... this may soud wierd but have they ever shocked you? cuz if they did that means you blew the speaker... these are GREAT headphones but they are poorly built. the speaker is in the wierd looking bump in the headphone and because its in a sealed enclosure and because its 16 ohms you can blow the speaker easily. just return them. skullcandy is really good with returns.

Try the SKull Candy website. They should tell where a repair center is that can do the job.

what happens is inside the cord where you have your ear phones connecting to your ipod, there is a thin wire that can easily brake. it happens if u for example, rap your ear phones around your ipod. if your rap the chords to tight, the wire can break. it can even brake when you move the cord too much. such as spinning it, shaking it and such.
the wire that breaks connects to one side or both sides of your earphones, which produces the sound. if you can hear only on one side, the cord is damaged and cant be fixed.

i would go and buy new ear phones
i perfer skullcandy in-ear earphones because the wire is secrurly wrapped, and doesnt brake easily such as other producers. the skullcandy ear phones are in my mind are much better then other earphones. you actually feel like your in the room or at a live show.

could be caused by the way you wrap them up the cords should never be wound tightly it causes a short and it just so happens that earphones are made of light weight wiring to make them seem to disapear when wearing them so what to do is instead of winding them when your done simply fold them loosely so to speak

get on there site and warranty them. they will replace them for you. www.skullcandy.com/warranty