Euro-pro 385w My wife forgot how to thread this machine and it is now up to me. Im at a lost. Any help would be greatly appreciated. Sincerely, John Miller [email protected]

You can go an buy the marching power cable on a nearby electronic shop then it will be up and working

Euro Pro 9000 Sewing Machine Threading Diagram

Instruction Manual Euro Pro 9000

Lost manual to euro pro multi stitch 9000 machine where can get one

My needle will not pick up my bobbin? I have tryed everthing! my bobbin was placed in the holder right. my needle is in the EP correctly! not sure if my Thread is correct in my machine. but I have read the manual and still cant get the needle to pic up. Can some one help me out on this! Euro-PRo 380A

Hi, If you don't mind paying $14.95 for a manual you can find it at sew4less.com or you can go to Euro-pro.com and see their frequently asked questions and maybe your answer will be there. I prefer having the manual in my hands. You can call them at 800-798-7395. Good luck

http://www.tradebit.com/filedetail.php/9338637-euro-pro-9105-sewing-machine-manual

You can get the manual here. As for the power cord I would call your local sewing machine distributor.

http://homeappliance.manualsonline.com/manuals/mfg/europro/101548.html

Good Luck

i.ve decided to part out my shark call me (john 9042623457) for price on all except computer (suspect bad) have all attach,pedal cord bobbins,etc.
john

Hi FixYa,

I'm fifi1076, and I'm having quiet a good bit of trouble with my sewing machine.

I'm new at this site so I don't know if I'm doing this correctly or not so please
forgive me if I do something I'm not suppose to do!!!!

I copied this question from off of this site for I wanted to make certain that
whoever answers my question will understand that all of the question
doesn't pertain to my problem.

"when we have it threaded the top thread keeps getting jammed up in the bottom bobbin. if i redo the bobbin as shown in manual then the bottom thread will not loop so it will stitch"

This is the only part that pertains to my problem...... when I have it threaded the top thread keeps getting jammed up in the bottom bobbin......and I can't get it to sew at all....it won't do nothing.....the motor will just sit there and grind.

If whoever can help me with this and can give me a solution I will be forever gratefull

Thanks,

Kay Nowicki

if your machine is like mine the bobbin is not filling right. My bobbin thread is very loose when it should be tight. I am also looking for bobbin solutions. If I wind the thread around the thread tension guide 2 or three times it keeps the thread tight going to the bobbin winder. I hope this helps

You can download the manual from the website below: http://www.euro-pro.com/europro/manuals/7500XH.pdf They also have a FAQ: http://www.euro-pro.com/europro/faqdetail.aspx?modelno=7500XH Lubricating: