Question about Asko WL6511W Front Load Washer

1 Answer

The wash still has water in it, it will not drain and where the time should be it says 0E. the door is locked. What should I do

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Asko Master
  • 43,501 Answers

Hi,
If you are having a problem with your top load washer then check out this tip...

Washing MachineThe wash still has water in it, it will not drain - 2_bing.gif does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washinThe wash still has water in it, it will not drain - 2_bing.gifimg src="/uploads/images/2_bing.gif" alt="2_bing.gif" class="h_mi" /> then checkout this tip...

Front Load Washing Machine2_bing.gif not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

Posted on May 21, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Samsung front loader is taking in water and flashing 0E. Can you help tell me what my problem is? Thanks


An OE code (not 0E) is an overflow error. Too much washing powder/liquid may have been added. Turn off power, wait 30 seconds and turn on power again. You should hear the drain pump operate to drain the machine.

Feb 22, 2015 | Samsung WF218ANW 4.0 cu. ft. High...

1 Answer

Error code 0E on LG WM1290 FHB ?


The error code 0E stands for obstruction error, meaning that the drain line is obstructed. This is why the spin fails as all the water is not being drained. Check the drain hose for kinks and clean the drain filter. If they are not the problem, there could still be an obstruction in the drain hose in or about the drain pump.

Dec 28, 2014 | LG Washing Machines

1 Answer

I have a LG WM2487HWM front load steaming washer. It has had the regular odor/mildew/mold problem from almost the first month. Recently the machine has struggled with draining all the water. Now it leaves...


Leave the door open for 24 hrs after wash for Odor problem. You need to clean the rubber gasket around the door with 1:4 Bleach/Water (It's Fun!...Not!) First though. Not draining? You need a New Drain Pump! Go to YouTube and place LG Washer not draining. They have 20 videos on how to repair...Very Easy!

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_b77d19396bfe2249

Oct 20, 2013 | LG WM2688HWM TROMM SteamWasher

1 Answer

Code 0E not draining the water


Hello Faye, thank you for allowing me to assist you!

I understand that the washer will not drain; however is it making a humming noise? If so, either the drain or pump is clogged and needs cleaning. Let's try setting the washer to spin cycle on. Will water pump out? If it does not, then the unit could possibly be experiencing a communication error with the control board, faulty pump, timer or door lock assembly. If I was in your position, I would personally contact a professional for an accurate diagnosis and to assist with the repairs. You can often locate a qualified provider by visiting the manufacturer website.

Oct 14, 2013 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Intermittant 0E error


I believe the OE error is generated if it takes too long for the washing machine to drain. If the drain is blocked or the pump is is not functioning well, the error will show up intermittently. I believe we experienced a similar error a couple of years back. After verifying the drain was clear, I replaced the drain motor, I believe the washing machine was about 5 years old at that time.

Feb 28, 2013 | LG WM-2277HW Front Load Washer

1 Answer

Error 0E


It sounds like your water inlet valve is stuck open. You have two on this machine, a hot water and a cold water assembly. You should be able to tell which was stuck from the temperature of the water spilling out.

It is an easy fix. To replace it you take off the top by removing the screws at the rear and pulling back on the top. Unhook the hose to the drain pump and drain the water out of your machine. The door lock on this model is likely set so that you cannot open the door if water is in the machine (they don't want you to flood yourself, but its a little too late for you) You can now access and remove and replace the faulty valve.

Put things back together, but leave the top off and see if the machine will start up and the door will open. If your door is still locked you should be able to reach down and find a pull tab around the door lock assembly. Pull gently on this and it should release the door.

After up get it back together and drained of water hopefully the error message will clear itself and you will be back in business.

May 30, 2012 | Samsung Washing Machines

1 Answer

I have an lg wd12650tp and it has stopped full of water with the code OE showing. I've tried emptying the filter at the front but it still wont drain? Any suggestions? btw apparently the code means...


Hi.

Error 0E is drain error.

Access the drain pump, located behind the service door at the base of the machine, in the front side, right below the washer door.

Disconnect power before starting the procedure.

Open the door and undo the pump attachment. Have a container ready to collect a good amount of water.

If that does not fix the problem, then there may be a fault. Further blockage, faulty pressure switch and faulty drain pump are the faults that can trigger error code 0E.

You can find parts and diagrams for most models using the link below:

Where do I find parts and diagrams?

Please click here to read an article showing how to fix common drain problems.

Regards.

Oct 21, 2011 | Washing Machines

1 Answer

Code 0E


That is actually a "DE" code, which stands for Drain Error. Open the access door at the bottom left on front of the machine. Use the small hose there to drain the last of the water out of the machine. Open the bigger knob in there and pull out the attached filter and clean out the filter. If there was nothing in the filter, replace the pump motor.

Feb 19, 2011 | LG WM0642H Front Load

1 Answer

Hi my washing mashine wont spin, and code 0E comes up on sreen and start button starts flashing PLEASE HELP THANKS


That is actually DE. (Drain Error) Open the small access door at the bottom left corner of the front panel. Use the small hose to drain the remaining water out of machine. Unscrew the big knob and pull it out to clean out filter. (If filter was clear, replace pump motor.)

Jan 01, 2011 | LG Washing Machines

1 Answer

Washer wont go through spin cycle


Bent pinched or clooged drain hose. Other cause may be the drain filter in the front of the machine. (The small door on the lower left of the machine) With a pan, remove the cap and drain water from the small tube. Then open the larger cap and clean out the lint. This should solve the problem.

Dec 17, 2007 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

Not finding what you are looking for?
Asko WL6511W Front Load Washer Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Asko Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Joseph Hoffmann

Level 3 Expert

1755 Answers

ROB

Level 3 Expert

858 Answers

Are you an Asko Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...