My washing machine is f&p Smartdrive 085 top loader. Bought and used in Australia.....here in Northern Ireland it is working ok but appears not to be letting hotwater into the machine and so is bringing on the hot flashing light. I have always used it on the warm/cold setting. ???
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
www.fixya.com > Forum > Tags smart drive 085 not filling with water when start button depressed Could be the magnetic latch on the lid that tells the machine when its closed you can by pass
42. (00101010) Phase 1 - Rotor Fault
Primary Source: The Motor Controller has had some confusing information feedback. Action: Turn off SmartDrive at the wall and back on again after 5 seconds.
Restart.
Unfortunately the service documentation for Elba is not available. Although the machine has been built by F&P and although is similar to a Fisher & Paykel Smartdrive there are some small difference. The clutch system may be similar to the smartdrive. I have uploaded the service manuals for two smart drive models below, see if that can help. Check section about disassembly.
If there is power and all your lights are lighting up but you get no responce from the machiene eg no spin, water filling, wash cycle or drain then it will be the sensor for the lid it will have coroded but this is an easy fix , I hope this helps
×