Re: Plugged my fbv Shortboard into my Line 6 Flextone iii...
Try plugging it in and then turning on your flextone, or vice/versa. If not than post it on the line 6 website, they have techs look at those problems all the time.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Read this cut and paste and verify compatibility as a first step:
<<<
*FBV is not compatible with Spider II 15 or Spider III 15.
**FBV is only compatible with POD 2.0 units with pedal jacks labelled "FBV Pedal." It is not compatible with older units which have pedal jacks labelled simply "Pedal."
(NOTE: FBV is NOT compatible with Ax212™, Flextone™ I, II or HD, POD® Pro, Bass POD®, Bass POD® Pro and Spider™.) >>>
Note there are apparently several versions. Check compatibility at this site:
Hi, befarms. The line 6 FBV Express allows you to select the A B C D in the existing/current bank. You will not be able to change the current bank, disable or enable the effects. What you can do is, save the preset on the bank number that you desire by holding down the channel button on your amp whether it is A B C or D. Then when the button flashes, you can reinsert or rename the preset and save it to the channel(or bank) that you wish for by scrolling to the bank number and pushing the button on the amp (A B Cor D). Therefore, you will be able to save your personal setting to a specific bank and channel.
You may need to do a reset and a calibration procedure. The info you need is on this page:http://line6.com/community/docs/DOC-4499 If you have the MkII there is also a software update for it.
×