Password i accidently put a password on my samsung u600 and now I cant remember the password so the phone is useless now. how do i go about fixing this problem I accidentaly hit the lock button on my LG AX-5000 / UX-5000 phone, and it asks for a 'Lock code' and I don't even remember making a code. How do I fix this problem?

You go to the back of the sim card and then later you go find the puk code is at the back of the sim cards then later put wrong password for 3 time then they will ask you for the puk code then put it then password 1234.

Hi, You can get the unlock code for a Samsung U600 from www.unlock-zone.com/samsung-sgh-u600/rs5wp9/ at affordable cost.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
STEPS FOR UNLOCKING SAMSUNG U600
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Method 1:

1 - Switch ON your Samsung SGH-U600 with a NOT ACCEPTED SIM Card.
2 - Samsung SGH-U600 will ask for "Password".
3 - Enter the Unlock Code.

OR (if the Samsung SGH-U600 shows "Insert Correct SIM Card")

Method 2:

1 - Switch ON your Samsung SGH-U600 with a NOT ACCEPTED SIM Card.
2 - Don't bother about what's being displayed on your Samsung SGH-U600.
3 - Compose : #0111*CODE#.

You can try to use your PUK code to unlock samsung sgh u600 password. Puk code is a unique number to unblock your sim card and that code comes with your sim card paper. The idea is put any password until your phone asking your puk code, if your phone asking that code enter your puk code in your phone. It should be unlock samsung old password so you can setup new password.Good luck!

you may need to format or flash the phone which means you will loose all your files.

rate this please

i cant remember my password for my samsung sgh u600 cell phone, how can i bypass the password to use my phone

If you havn't contacted your phone company I would suggest doing that. Not much you can do with passwords.

try this number, it should work 44619372 for Samsung SGH-U600.
All the best

Default password is the last 4 digits of the phone # assigned to it.

Hope this helps

You can unlock your U600 at:
http://www.unlocksamsungonline.com/unlocksamsung/u600

You need the cable that comes with the phone.

B.r.

hi
Try with all the code to see whether you can get one to unlock your phone. If all still cannot help then you can only contact Samsung Support for help. I hope these information below at least can give you some hints:

Note try codes which help direct unlock for either SIM Lock or Security Lock first before try other codes

*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
*2767*2878# (Temporary Unlock)
*7465625*638*00000000*00000000# (Set Code)
#7465625*638*00000000# (Clear Network Lock)
*#7465625# (Verify the network lock is “inactive”)

*2767*3855#
*2767*3855# - FULL E2P RESET
*2767*2878# - CUSTOM E2P RESET
#*7337# - UNLOCK
*2767*688# - UNLOCK
*#0523# - CONTRAST
*#9998*523# - CONTRAST
*#8999*8378# - Service Menu (X100)

First with different carrier SIM in phone at WRONG CARD screen ENTER on the keypad
*2767*3855# (wait 10-15 seconds) phone will reboot(restart)
When phone completes reboot ENTER
*7465625*638*00000000*00000000#
NEXT ENTER
#7465625*638*00000000#
AND THEN *#7465625# to check the locks....all locks are inactive...these are all the locks...
network lock - inactive
subset lock - inactive
sp lock - inactive
cp lock - inactive
sim lock - inactive
activa lock - inactive
phone lock - inactive
auto network - inactive
auto subset lock - inactive
auto sp lock - inactive
auto cp lock - inactive

Good Luck