Keeps turning off afer a few seconds of it coming on

Is this a tablet? You can do a factory reset by holding the power and volume down or up bottons at the same time for a few seconds. At first it will t
Reset keep holding the bottons a few more seconds until the factory reset option comes up. It will erase everything and give a fresh start.

You will need to replace the solenoid of the gas dryer.
What happens is that the solenoid cannot hold the gas open for so long that closes. That's why heat stops after a few seconds.

E 3 is not a maytag fault code . may be f 3 . I need your model & ser # and I can tell you more . thams mm

If you can make out a faint image then the fault is a backlight problem.
The fault could be an inverter board or the CCFL lamp/s
For service, parts and DIY info check out LCD Parts - click on this link to their WEB site : -
www.lcdparts.net

wen you go to play a muliplayer game and the second remote won't turn on automatically wen a button is pressed then with the player one remote go onto the wii menu then go onto wii remote settings ( at the bottom of the screen) then click on reconnect press 1 and 2 at the same time on the player one remote after a while it will turn on the do the same thing with the player 2 remote and it should turn on afer a few seconds

hope that helps =]

software update by setool.

captioning on turn off with remote.

How do I do maintanience on my clipper to keep them running good