I have a lumix fz28 which when you turn it on states that 'the memory card is locked'how do I unlock it? thanks

There is no such button. Instead, use the "Copy" command in the Playback menu.

You can erase them as you normally would when you have a memory card in.

To access the pictures in the internal memory, you need to remove any memory card that you have in your camera first. Then go to preview mode, push the trashcan icon and select "Yes" when asked if you are sure you want to delete the picture.

That's all!

Take the memory card out of your camera and look at it. SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the other way and then back again.

If you have memory card reader you can take memory card out of camera and put it in the card reader and simply copy-paste pictuer fom your camery to comp.

hi there

on the side of te mermory card there is a turn on and a turn off just look on the side of it

Move the slide switch on the side of the card.

try taking out your memory card from the slot and there would be a small flip switch, try putting that to unlock position.. hope it works out

see here
http://www.fixya.com/support/t2501487-memory_card_locked

Some camera's, especially older ones, have a limit as to the maximum size of the memory card that they support. Look in the manual to see what the camera can support.

Take the card out - on the side there is a little white slider with a locked & unlocked padlock symbol - move it to the opposite position it is in now.