MAINTENACE TIME DISPLAYED ON MY km-2030 - Kyocera Mita Office Equipment & Supplies

Right, you can't use both at the same time. Try only one at a time.

Try using a small soft brush to brush it off while using a good hepa filter vacuum to remove the toner at the same time. Wear a good breathing mask to protect your lungs!

how to clear the code c620 of copystar cs2030

Try this:

Press and hold stop, start, and left exposure key in that order.

Release and press stop again. Use zoom keys to enter 163, press start.

Exit the mode by entering 001 and start, or power off/on.

press in sequence 10871087...
Go to U251 using cursor keys.
Check and clear PM count(copies since from last PM and PM reset).Press start to display six digit PM cycle. Select "Clear" w/ cursor up/down to clear count back to ..
Go back to U001 and press Start key to exit.

You need to organise for a technician to come and service the machine.You can continue to use the machine.

What is the error code that is being displayed? Is it displaying "Time for maintenance"? If there is no error code and the copier still works, it means the internal count has got to a factory set meter to have the drum & developer and possibly other part replaced at that time.

you have a broken gear in the maindrive motor gearbox

Setting the destination Description

Switches the operations and screens of the machine according to the destination.

Purpose

To be executed after replacing the backup RAM on the main PCB or initializing the backup RAM by running

maintenance item U020, in order to return the setting to the value before replacement or initialization.

Enter Maintenance Mode
Enter "10871087" from keypad, You should now be in maintenance mode.
Enter "252"press "Start / Print" key.
Select your destination from list on the display.
Press "Start / Print" key.
Enter 001 "Start / Print" key to exit to normal display.

Method

Press the start key. The screen for selecting an item is displayed.

Setting

1. Select the destination using the cursor up/down keys. The selected item is displayed in reverse.

Display Description

JAPAN METRIC Metric (Japan) specifications

INCH Inch (North America) specifications

EUROPE METRIC Metric (Europe) specifications

ASIA PACIFIC Metric (Asia Pacific) specifications

2. Press the start key. The setting is set, and the machine automatically returns to the same status as when

the power is turned on.

Completion

To exit this maintenance item without changing the current count, press the stop/clear key. The screen for

selecting a maintenance item No. is displayed.

my copier is displaying error code 100, whats the problem km 2030