Canon gp 335. kopira sitne crne pruge u jednu stranu. kako a resim problem?

okanovic elvir

Canon GP 405 error E805 E805 (The fan rotation is faulty.)
suspect is feeder fan (FM1) or reversing guide cooling fan (FM9).
try Check

I'm not familiar with the GP-335 but it may be similar to the GP-30 for America. This is an error for the deplecition of the fixing web. That will have to be replaced ( P/N FY1-1046-000 ). The nget into service maod and reset the web counter in COUNTER section.

Pokušajte za ?iš?enje mlaznica spremnika s tintom pomo?u ra?unala. U?itaj obi?nom papiru. Otvorite centar Lexmark Solution (idite na Start, Programs, Lexmark XXXX serije, Lexmark Solution Center). Od Odr?avanje karticu, kliknite Clean popraviti horizontalne pruge. Kliknite Ispis. mlaznica stranici ispisuje, prisiljavaju?i tinte kroz o?istiti za?epljene mlaznice. Ispišite dokument opet kako bi provjerili da je kvaliteta tiska je poboljšana. Ako se kvaliteta ispisa nije poboljšalo, pokušajte ?iš?enje mlaznica tintom i do dva puta.

Napomena: Ovo je prera?unavaju translate.google.com.

neko mi je provalio na facebook profil i promenio sifru i ja ne mogu da udjem vise na svoj profil,...sta da radim? ne znam ni svoju gmail sifru koja bi mozda olaksala stvar!! :( pomozite mi,...hvala..

Pošaljite email na koji Vam se mo?e poslati service manual. Resetiranje se radi u servisnom modu.

E005 means that the cleaning web needs to be replaced.

E051 indicates that the side or horizontal registration sensor is not detected try to switch off/on the machine but if the same error code display again thereis a small motor that drive the sensor assy should be change.try to move the sensor manualy by opening the upper right side peep inside you will see a long white plastic wth teeth push to this to right side hope this will help

press additional function button once and press 2,8 buttons at a time & press additional function button again & execute the following
select <copier> <counter> <misc> <fix web> then press clear button on the display.
automatically the web counter will be zero , the proble also cleared.

push *28* then copier>counter>misc-fix-web set to 0.