Unlocking Code Required to make the Sony DVP-PQ2 DVD PLAYER MULTI-REGION.

Sony DVP-SR760HP region code - VideoHelp

https://www.videohelp.com > dvdhacks > sony-dvp-sr7...

Post Region code hack posted by ravikalyan_143, September 07 2016: 1. Make sure the DVD player has no disc in it and is powered off 2. Press 12345 on the ...

Sony DVD Player DVP-SR760HP - Uncoding of Region ...

https://forum.videohelp.com > Video > Authoring (DVD)

Dec 10, 2014 - Need help to make my new Sony DVD Player DVP-SR760HP Region Free. My player is suitable for Region 5. I have DVDs of Region 2 since I ... Sony DVP-SR760H Region free unlocking - VideoHelp Forum
Dec. 21, 2014
Need Help to make my Sony DVP-SR310P DVD Player region ...
Mar. 13, 2017
Sony DVP-SR370 DVD-player region code - VideoHelp Forum
Dec. 26, 2014
Region Code free for sony dvp-sr320 - VideoHelp Forum
Feb. 14, 2014
More results from forum.videohelp.com

Hi,

From which region is your did player?

Hi there, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_mb0o9

The SONY DVP FX720 is region free. SONY is notorious for putting out DVD players that will not play all types of DVDs.

I found this region hack here Sony DVP-NS575P region code , check it out:

"Warning
The following guide describes how I managed to make my Sony DVP-NS705V DVD player multi-region.

There are no guarantees that you will be able to do the same. Be aware that you will probably void any warranty you have and possibly even break the player.

Put shortly, you proceed at your own risk.

Introduction
First of all, the Sony DVP-NS705V can be made multi-region simply by applying appropriate service codes, you do not need to install a so called "mod chip".

This supposedly applies to the entire NS-series of Sony DVD players. There are some encouraging reports out there supporting this, but nothing has been verified by me. Again, if you choose to apply this guide to any DVD player, you do so at your own risk.

If you do find that this procedure works on another model, please drop me a line at [email protected] and let me know. Include the exact model number and original region of your player.

Update: Some users have reported success on the following players:

DVP-F21 (special thanks to Garry Self for this one)
DVP-LS500
DVP-LS755
DVP-LS785
DVP-NC615
DVP-NS300
DVP-NS305
DVP-NS310
DVP-NS315
DVP-NS330
DVP-NS333
DVP-NS355
DVP-NS360
DVP-NS400
DVP-NS405
DVP-NS410
DVP-NS430
DVP-NS433
DVP-NS575
DVP-NS585
DVP-NS590
DVP-NS700
DVP-NS730
DVP-NS765
DVP-NS900
DVP-NS905
DVP-NS930
DVP-PQ1 (thanks go to Michael Joy for this one)
DVP-PQ2
RDR-GX3 (thanks to Andreas Norman)
RDR-GX7 (thanks to Daniel Tapie)
RDR-GX300
RDR-GX700
RDR-HX900
RDR-HX1000


Please note that not all players behave exactly like the NS705. For example, some players do not display "success" when hacked.

Thanks to all who have contributed.

The infrared service codes required to make the update are available on the Internet. Unfortunately, not many people have an appropriate device to enter the codes into. You basically need a programmable remote (Philips Pronto, One-For-All) or a PDA (Palm, iPAQ) with suitable software.

This guide shows you how to make the update with a regular PC equipped with an IRDA port.

The procedure

1. Download the winsamp -package from Blank Frank's site.

http://www.veg.nildram.co.uk/remote.htm

This innovative piece of software allows you to send standard home electronics IR signals using a PC IRDA port.

2. Extract the package onto a bootable DOS floppy disk.

3. Download this IR code

http://www.selen.org/files/REMOTE.TXT

file and place it in the same directory as the package above.

This file holds the five necessary IR codes converted to the format used by Blank Frank's winsamp.exe. Please do not bother Frank with questions concerning this particular procedure.

4. Boot up your PC from the floppy disk and run winsamp.exe.

If your IRDA port doesn't appear as COM2 you may override this by using an appropriate command line switch. For example, use COM1 by running 'winsamp C1'.

5. Press the 'r' key to load up the codes into winsamp.

6. Make sure your DVD player is in standby mode and your IRDA port is within range.

7. Run the IR codes from 1 to 5 by pressing Enter on each corresponding button.

8. Your DVD player should start up and display the text "SUCCESS".

9. Repeat step 7. Your player should return to standby mode.

10.Your player is now multi-region."

An option. 
 Download DVD fab or another like product which takes off the region code completely using a PC then copy the DVD onto another DVD using the DVD burner,or find someone who can do this for you. 

1. Switch on the player
2; open the CD compartment
3. Enter the following code (using the remote): 2812
4. Highlight the region
5. Change to 9 (for Multi-region) using the 'Enter' button
6. Hit 'Clear' to exit

check with different region DVD

The unlock method should work for DVD players bought in regions 1 (USA) and 3 (south East Asia)

You need to use a One4All Universal remote for regions 1 & 3

1. Switch on the player
2. Pop open the CD compartment
3. Enter the following code (using the remote): 2812
4. Highlight the region
5. Change to 9 (for Multi-region) using the 'Enter' button
6. Hit 'Clear' to exit

not u would have to set the code to 0 all sum do sum dont usally need a unversal region free player out of box to do it

Unless it is a multi region player (with it multi region ENABLED) This is impossible. Id spend 50$ on a new multi region dvd player. =p