Stuck on demo mode. continues to show demo mode on screen every 1.5 minutes. How do we get it off demo mode?

If your Lamona electric oven is stuck in demo mode and the manual does not provide any information on how to disable it, you may try the following steps:

1. Unplug the oven from the power outlet for a few minutes and then plug it back in. This may reset the oven and remove the demo mode.
2. Press and hold the "-" button for about 10 seconds. This may disable the demo mode and activate the oven.
3. If the above steps do not work, try pressing and holding the "Function" button for about 5 seconds. This may activate or deactivate the demo mode.
4. If none of the above steps work, contact the manufacturer or a professional technician for assistance.

It's important to note that the ste

To Start Demo Mode

1. Select the Tools keypad.
2. Scroll and select INFO.
3. Select Store Demo Mode and select ON. NOTE: The display screen will show the time
4. Select the Tools keypad.
5. Select Try the Product or View Product Videos.

To Exit Demo Mode:

1. Select Try the Product.
2. Scroll and select Explore.
3. Select the Tools keypad.
4. Scroll and select INFO.
5. Select Store Demo Mode and select OFF.
6. Select YES on the confirmation screen.

link copy and paste

https://producthelp.whirlpool.com/Connected_Appliances/Product_Info/Videos/VIDEO%3A_Entering_and_Exiting_Demo_Mode_-_Smart_Appliances


..

Mystery make?

Demo Mode - Wall Oven - Product Help ' Whirlpool

producthelp.whirlpool.com > ... > Demo Mode
Dec 14, 2019 - Select Store Demo Mode and select ON. NOTE: The display screen will show the time; Select the Tools keypad. Select Try the Product or View ... Missing: NQ50J3530BS ‎' Must include: NQ50J3530BS

Wall Oven or Range Stuck on Demo Mode

products.geappliances.com > gea-support-search-content

Electric wall ovens and ranges (includes dual fuel) run on 240V, but are designed to go into Demo Mode when hooked up to 120v service. Dealers use a Demo ... Missing: NQ50J3530BS ‎' Must include: NQ50J3530BS

Solved: Samsung NX58H5600SS, Oven won't ignite... Stuck in ...

us.community.samsung.com > td-p

Dec 9, 2020 - Did more research and stumbled on a posting in another forum about the stove being in demo mode. Only problem there are no instructions ... Missing: NQ50J3530BS ‎' Must include: NQ50J3530BS

NE58K9500SG Electric Range with Slide-in Design 5.8 cu.ft ...

www.samsung.com > ... > Home Appliance

Oct 1, 2020 - Demo mode is for use by retail establishments for display purposes only. The heating element does not operate when Demo mode is activated. Missing: NQ50J3530BS ‎' Must include: NQ50J3530BS

Try unplugging it for a couple of minutes

The Sony Dash display comes preinstalled with a demo mode that will continue to play untill it is deactivated. It is different than a usual Dash. To disengage the demo mode please perform the following actions: 1) Unplug AC cable from back of Dash but leave plugged in wall 2) Press and hold top menu button and plug cable back into Dash (continuing to hold menu button) 3) You will shortly see a screen for Special Options and will be asked to continue to hold Menu button for 3 seconds. Do so than release 4) Wait about 90 seconds and a "special options" menu will appear 5) Select the last option "Restore Factory Settings" 6) Agree to message saying settings will be lost and wait about another 90 seconds for it to restart 7) Allow the short demo video to play and you will be dropped into new menu regarding the tour 8) Select the last option, "never play tour again" These steps should return the Display Dash into a normal unit and save the customer some aggrivation.

I had to contact TomTom to answer this, their advice was:
On your device tap the bars that show the strength of the satellites. Then top right tap the clock and hold for 30 seconds.

I tried this but it didn't make any difference to me, but I thought it may help other users. I'll let you know when I get any further advice.

Regards,

Sean

Hello jayme84,

To cancel "DEMO" mode on the JVC:

Enter the PSM (personal settings mode) and turn DEMO off.

1) Press and hold "SEL" until the display changes.
2) Use the left/right rocker switch until "DEMO ON" is displayed.
3) Turn the volume knob to select "DEMO OFF".
4) Press "SEL" to exit.

Hope this helps.

I had the same problem. Was told to unplug the set for 1 minute but it still was stuck in menu screen scrolling. So I was told to unplug the TV for 4 hours, it resets it I guess because it worked! Try it!

to deactive demo mode press menu on the remote...then w/that screen up push the screen mode little gray button at the top of the remote...note that this will not change anything on the screen...i know weird huh...now type in the numbers 9012 you should now be at a new menu the top opption is demo mode...choose it and then choose on or off...good luck i see this i an old post but i hope it helps someone...

Pressing "timer/clock" button 4 times turns on and off demo mode.