Ricoh Aficio 2027 All-In-One Laser Printer Logo
Sandeep Swamidas Posted on Jun 23, 2010

I Cannot solve SC541 Error in RICOH Aficio 270

I found that there is problem to my RICOH Aficio 270, PCU (photo control unit).
I happend to remove, reboot without the unit.
The functional error SC 541 is indicating in the display.

How i can remove this error?

1 Answer

A

Anonymous

It's not the PCU (photoCONDUCTOR unit), It's either a thermistor or blown out heater lamp in the fuser. Call a tech. The code can only be reset in service mode

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Ricoh Aficio. How I clear SC390 code? Print is clear, after 10 copies SC390 code is coming. How do I solve this problem please?

Question edited tor a lot more clarity and add MAKER, but NO MODEL NUMBER! All questions need full make and model.

Ricoh Aficio 200 - Error Code: SC390

PrintCopy .info https://printcopy.info > code=SC390
Code: SC390; Description: TD sensor error 1. The TD sensor outputs less than 0.5V, 20 s after the TD sensor initial setting has been performed.
Missing: cod ‎' Must include: cod

SOLVED: How fix sc390 cod of ricoh

Fixya https://www.fixya.com > ... > Ricoh
The closest thing is the sc390 code, which means either the toner density sensor or the developer has gone bad, and typically replacing the PCU can fix that ...

Error Code sc 390

Copytechnet https://www.copytechnet.com > 56632-sc-390-a
Sep 24, 2011 - I've got an Aficio 1018 that's generating sc390 after every 10 copies. I recently fitted new drum, cleaning blade and developer and changed ...
Missing: cod ‎' Must include: cod

RICOH Error Code List - mtechsinfo.com

mtechsinfo.com http://www.mtechsinfo.com > files > Ricoh Erro... PDF SC-390-2. Toner density sensor error. SC-391. Developer bias problem or FU103 on Aficio 550/650 Image storage address error. Aficio 551, 551P, 700, 700P.
14 pages
1helpful
1answer

Ricoh aficio MP2000 ERROR code SC302.

https://printcopy.info/?l=en&mod=erc&brand=Ricoh&model=Aficio%20200&code=SC302


Ricoh Aficio 200 Error Codes


Ricoh Aficio 200 Error Codes Code:

Code

SC302

Description

Charge roller current leak
A charge roller current leak signal is detected.

Causes

• Charge roller damaged • Charge high voltage supply board defective • Poor connection of the PCU
6helpful
5answers
1helpful
1answer

How to replace image unit ricoh aficio 220

Do you mean the photoconductor unit? To replace the photoconductor (PCU), open the front cover and the right side covers (the duplex door and the main side door). The PCU sits to the right of the toner bottle -- it is a black unit that has the blue cylindrical drum facing the right side of the copier.

On the upper left side of this unit is a ridged tab. Push this tab in and slide the PCU all the way out of the machine. Open the box with the new PCU and remove all of the tape and paper, then slide the new PCU in where the old one came out of. When you shut all of the covers, the copier will recognize the new PCU.
0helpful
1answer

I have some ricoh aficio 1224c with errors c481

SC481
Transfer belt mark detection error
• The main motor is operating; and
the lock signal is detected. → The
belt mark sensor signal does not
change for 120 milliseconds.
• Defective main motor
• Image transfer belt out of position
• Belt mark blurred or absent

I would remove the pcu unit (3 screws)and check the transfer assy belt mark and clean the sensor that reads the belt mark. Worst case senerio is replaceing the entire pcu unit.
0helpful
1answer

Hi I have an Ricoh aficio CL7300 printer and it is displayin error message SC541 what does this mean and how do i Fix it

sc 541=Heating roller thermistor error (Fusing unit).
The thermistors could be dirty or damaged.
The fusing unit can be removed and inspected(without removing any screws)(Left door)(lower handle).
If you see any damage you might have to replace the unit(or only the part if u r lucky).

1helpful
1answer
40helpful
4answers

About ricoh copier problem

sc541 is a fusing unit error code. Can you reset the code in service mode?
13helpful
5answers

SC 441

Hi there the following is the description from the service manual hope this helps you Thanks J

441 PCU (CMY) motor error
The drive motor of the CMY
PCU is not locked.
• Defective gear
• Voltage between pins 2 and 14 (CN12 on engine
control board) abnormal (not +24V), or pin 12
(CN12 on engine control board) unable to send
motor clock
• Defective CMY PCU drive motor
1. Replace the CMY PCU.
2. Replace the engine control board.
3. Replace the main drive unit assembly.

I would try replacing the CMY PCU (Drums (Photo Conductor Units) first before any of the others.

Thanks J
Not finding what you are looking for?

1,180 views

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...