I need help: i cant get the my rooter to send out a wireless sign

from your rooter administration program/file.
you need to log in into ur rooter. Ussually in a browser : http://192.168.1.0 or 192.168.1.1 or 192.168.0.0 or 192.168.0.1
Login in there with ur custom username and password (you should have them on ur rooter manual. (try user: admin and password: admin it should work.)

Frist plug your Friend Laptop on the rooter See if you see and extrat light flashing on you Hob Rooter ....Then Go on your Sitting Control Panel and Network setup wizard ..then follow the instruction ..

1st You download Webcam Driver.
I connect the camera on my rooter and run the cd
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

check the IP address on the printer,if u reset ur rooter it will assign a new IP so thats y cant print to it In a future use a host name of the printer so this wont happened again

Check all Cables, Firmware & Drivers are up to date?

what is the right configuration of zyxel p-600 wireless? i cant connect w/ my laptop

You do not need 2 routers to connect to the internet infact you need only 1. having 2 conflicts with pcs and causing them not to work.

From the wall you have your cable fro your internet that plugs into your modem, from the modem it plugs into the router by ethernet cable to the uplink slot and then your computers connect to the router. Most routers can connect 4 computers at once. If running them all wirelessly just reboot them and they should connect automatically. If your wiring them plug them into the back by an ethernet cable in the slots 1 for the first PC, 2 for the second so on and so on. You may have to cold boot everything at first meaning shut down all the computers, unplug the router and modem. Then Plug in the modem let it boot up, plug in the router let it boot up then the pcs.

If you need more hook ups if 4 isnt enough yo uneed a switch or access point not another router.

Let me know If this helps and if I can help further.

Joe

all i can think of is reconfigure

Have you changed the configuration of your internet at some point? In Vista I think you can change them somewhere in Control Panel under something like "Internet options" or "Connectivity"...

Ensure that all settings are set to allow full speed through to your system.

Another thing is that some sort of Antivirus software may be blocking some of the internet connections, check the confuguration on your Antivirus software incase it is blocking internet signals.

Hope this helps!

first ..you do have your own rooter dont you?

the way you explain this problem sounds like you just logged onto which ever connection you found! did you or afamily member set up a commection using belkin54g?

back to basics!
in order to connect to the net with any device...PC (if you dont have a pc how did you send this post?)...Wii PS3 first you need to install and connect to your own internet connection device i.e.ASDL Broadband rooter..call it what you want

lol it sounds like you've been useing your next door neighbour's unsecured internet connection...nice cheap way to get connected.....but a bit of a bummer when text door go on holiday
i suggest setting up your own rooter (withyour own password)