JVC silver Digital Camcorder

Turn the power switch on your camcorder to "Off." Connect the USB cable that came with the camcorder to the USB port on the camcorder. If you are using the DV cable, connect one end of the cable to the computer first. Put the other end of the USB cable into the USB port on your computer. If you are using the DV cable, connect it to the camcorder. Power on your camcorder. Wait while your computer recognizes the attached JVC GR-D270U camcorder. Typically you will get a pop-up on your screen asking how you want to proceed once the camcorder has been recognized. Open your video editing software, such as Adobe Premiere, Roxie, iMovie or Windows Movie Maker. Import, or capture, the video from the camcorder to your computer using the video editing software. For example, in iMovie you click on "File," then "Import from Camera" to download the movie from your camcorder to the computer.

Please use the CD which came with your JVC and install the drivers first, then connect your JVC GR-X5 Mini DV. If you do not install the drivers, your PC will never see it.

If you do not have the CD go to the JVC web site and download the drivers and install it. here is the link to JVC web Site
http://camcorder.jvc.com/index.jsp

Good luck!!!!

download and install this driver...http://www.helpdrivers.com/ingles/listado/dow.asp?codigo=120128

recently bought a used jvc camcorder gr-d290 but even when l pu tthe battery on charge for hours it goes flat in less than twenty minutes . what can be the problem?

Here is the driver
http://www.bioticaindia.com/download.php?file=gr-d250
However you have to register(Its free).

i need drivers for jvc gr-d93 for windows xp

how to conect jvc GR-850AG Mini DV digital camcorder

same problem here... i tried to using USB cable to connect to a computer but the camcorder cannot be detected.

you have not mentioned which model JVC camera you have bought, any ways, if it has with both memory card and minidv cassette facility, then you require a fire wire card to transfer cassette contents, and for stills on card insert the card to the slot and then connect it to the computer through USB cable, then the computer will recognise your camera.

Let me tell you that you can only store stills taken from your camera that too in still mode initiated on your GR-D370. To transfer video to your computer you require a firewire cable, a DV port on your PC.