Sony Playstation 3 (PS3) Console Logo
Posted on Jun 30, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Ok so i bought a play station 3 in iraq while i was deployed it is 220 and i bought a power converter since i got home and it turn on every thing works but it will not put out a signal for my tv neither hdmi or component work

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

  • Expert 61 Answers
  • Posted on Jul 01, 2010
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Joined: Jun 27, 2010
Answers
61
Questions
0
Helped
10656
Points
131

  1. Make sure the HDMI cable is connected to the HDMI OUT port on the back of the PLAYSTATION 3 system. Connect the other end of the HDMI cable into the HDMI Input port of the TV or display monitor.
  2. While the PLAYSTATION 3 system is in standby mode (red light on the front of the system), hold down the touch-sensitive power button on the front of the system until the system goes into standby mode again . (So the light cycle would go from: red light --> green light --> then back to red light). This will ensure that you have held down the power button long enough to reset the Video Output Settings.
  3. Turn on the PLAYSTATION 3 system and once the system finishes powering up, the Video Output Settings will automatically reset to the standard resolution (or detect the current display output settings of your TV/monitor).

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Wont play DVD movies

do you have the converter?

http://www.mp4converter.net/guides/ps3-video-converter-guide.html
tip

PS3 Has no Video - Simple fix!

When you attach your Play Station 3 to an HD TV through an HDMI port, the Play Station 3 will ask you if you wish to switch to HD Mode.

However, if you decide to move it to another TV that is not HD compatible, you will get no picture because the Play Station 3 is “stuck” in HD (HDMI) mode.

Follow these steps to resolve your problem:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button until the screen "flickers" and then immediately release. This should reset the video settings.

4. Wait a few seconds, and the Play Station 3 (PS3) logo should appear.

If this does not resolve the problem, follow these steps:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button on the front until the Play Station 3 beeps and then turns off again. This should reset the video for you and you can turn it back on after this.



That’s it! You can play your Play Station 3 again!
tip

How to change or reset PS3 Video Display Mode

When you attach your Play Station 3 to an HD TV through an HDMI port, the Play Station 3 will ask you if you wish to switch to HD Mode.

However, if you decide to move it to another TV that is not HD compatible, you will get no picture because the Play Station 3 is “stuck” in HD (HDMI) mode.

Follow these steps to resolve your problem:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button until the screen "flickers" and then immediately release. This should reset the video settings.

4. Wait a few seconds, and the Play Station 3 (PS3) logo should appear.

If this does not resolve the problem, follow these steps:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button on the front until the Play Station 3 beeps and then turns off again. This should reset the video for you and you can turn it back on after this.



That’s it! You can play your Play Station 3 again!
1helpful
1answer

I bought a 1997 jeep grand cherokee 2 years ago. Because of deployments to Iraq and Afghanistan, this vehicle has been in storage for all that time. Should I have all the fluids (oil and gas) replaced...

if the vehicle was not started for 2 years, the engine may be stucked up. if it is not, the replacing the oil is ok. since 2 years is a long time you have to check everything.
2helpful
1answer

With converter box only receive 2-3 channel

They have powered antennas that give you more stations. I added a HD antenna I bought off ebay for 19 dollars and I get 10 stations. Please give me good rating It means a lot to me.
0helpful
1answer

Can't get digital converter box to work with Toshiba TV/VCR Combo

You will need to rescan your stations. On the June cutoff date, they reshuffled and renumbered most of the stations.
0helpful
1answer

I'm in Iraq and I brought my ultratone k450fx with me to play my korg synth and being exciting to finally be able to play I plugged it in without using a transformer and blew a fuse, what size do I need to...

In Iraq I assume the voltage is 220-250.  The fuse you'll need is a 220-240V 1.25A H 250 V.  You can actually use this model without a transformer/converter if you have the voltage selector set to the non-North America setting.  
Play well!  
0helpful
1answer

Picture not clear when playing a recorded program from dvd

I had a similar problem with an Insignia converter box. This is confusing but . . . I was told by an Insignia person that you can only program the channel that you have on and cannot record a different channel. My output channel is 3. My roof antenna is attached to my converter box "From Antenna" jack. Attach the converter's "To TV (RF)" jack to your VCR's "Antenna Input" jack. Attach "Antenna Output" jack to TV "Antenna Input". You will see your programs on your output channel, but if your VCR is like mine, your VCR may not recognize anything but your output channel, no matter which station is actually showing on the TV. If I want to record a show on channel 7 while I'm gone, I have to make sure the converter station is on 7 and that I choose channel 3 as my channel to record. You cannot program shows to be taped on different stations unless you physically change it on the converter box. I put my VCR on "Record" and flipped the stations from one to the next from my converter remote control and I taped exactly what was on the screen from one station to the next. You cannot tape one thing and watch another. Clear as mud??? Hopefully, not.
0helpful
1answer

An HP home PC boght in Peru 220 volts here its 110

All you need to do is replace the power supply, where the plug plugs into the back of the computer. Power supplies start at around $25.

Thanks and please take a moment to rate as fixya. Thank you.
0helpful
3answers

Plasma P50H401 tv will not display picture

I know this might sound stupid but try changing the channel or changing the aux / cable / tv button... I  had to put my phillips 50" in the shop for the same problem ..but I had it for 3 yrs .they said it was the power supply and will cost 1k to get the power back and may cost evne more if one of the boards went out (video i guess?) so make sure u get the extended warentee u will need it .Its only a matter of time ... good luck quickdrj

Not finding what you are looking for?

55 views

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles & Games Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Jose Ramirez

Level 2 Expert

264 Answers

Alexander

Level 2 Expert

171 Answers

Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...