At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Windows XP was re-installed from scratch and the primary user, only user account, has administrator rights. Logging in under any user or password is not necessary. No restrictions have been set under any settings. Please help...Windows XP was re-installed from scratch and the primary user, only user account, has administrator rights. Logging in under any user or password is not necessary. No restrictions have been set under any settings. Please help...
i have aproblem in my A045 Gestetner which when i send spme cad drwaings to print it from my pc it is says send to plotter but it not shows on the software of gestetner ploter ( after i do reload again for the machine it will comes very slolwy ) any clue plz ....... actually i'm using this device as shared with 100 person . i have aproblem in my A045 Gestetner which when i send spme cad drwaings to print it from my pc it is says send to plotter but it not shows on the software of gestetner ploter ( after i do reload again for the machine it will comes very slolwy ) any clue plz ....... actually i'm using this device as shared with 100 person .
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Computer administrators have access to make certain changes on a computer that other users may not have. Administrators have full freedom to install and uninstall programs, move files around and make changes to the Windows registry. There are actually three ways that one may become the administrator on their computer; during the initial setup, change the settings in the Control Panel or by having the current administrator change the permissions on the account.
Set up an account during the initial setup of Windows on the computer. During the setup wizard, you will be asked to set up an administrator account. Choose the account name, user icon and password to set up the administrator account. Step 2.Change your account permissions if there isn't an administrator account currently setup. During some installations Windows users were allowed to install the program without setting up an administrator account. Click on "Start" then "Control Panel" to open the Control Panel. Click on "Users and Accounts" or "Users Accounts and Family Safety". Click on "User Accounts." Click on "Add or remove user accounts" then "create a new account". Assign the new account administrative privileges, a user name and password. Click "OK" and close all windows. Log in under the new Administrator account. Have the current administrator change your account privileges from "User" to "Administrator". She can do this by following the same steps described in Step 2. Instead of creating a new account, she must click on your current account and then apply the new permissions. If you do not currently have an account on the computer, she will need to create you one. b>
Step 1: Computer administrators have access to make certain changes on a computer that other users may not have. Administrators have full freedom to install and uninstall programs, move files around and make changes to the Windows registry. There are actually three ways that one may become the administrator on their computer; during the initial setup, change the settings in the Control Panel or by having the current administrator change the permissions on the account.
Set up an account during the initial setup of Windows on the computer. During the setup wizard, you will be asked to set up an administrator account. Choose the account name, user icon and password to set up the administrator account. Step 2.Change your account permissions if there isn't an administrator account currently setup. During some installations Windows users were allowed to install the program without setting up an administrator account. Click on "Start" then "Control Panel" to open the Control Panel. Click on "Users and Accounts" or "Users Accounts and Family Safety". Click on "User Accounts." Click on "Add or remove user accounts" then "create a new account". Assign the new account administrative privileges, a user name and password. Click "OK" and close all windows. Log in under the new Administrator account. Have the current administrator change your account privileges from "User" to "Administrator". She can do this by following the same steps described in Step 2. Instead of creating a new account, she must click on your current account and then apply the new permissions. If you do not currently have an account on the computer, she will need to create you one.
Your Gestetner A045 is made by Ricoh. I will be a lot easier finding a Ricoh dealer than a Gestetner one. Here are the equivalent models for your machine. That is, any dealer listing that they service Ricoh, Savin, Lanier or Gestetner should be able to service it.
Your machine is the same as:
Ricoh Aficio 240W
Savin 2400WD
Lanier LW310
Good Luck and Thank You for using Fixya.
WheatlandServices
or any other document writer and set the default folder it saves to in the dropbox print queue. This will let you hit print, select your document writer (which you can rename to "ricoh") and print away!
scantools is installed with plotbase.
are u able to print?
if not , u need to install the full software .
(hope u have the serial no.-- on the interface card in the pc)
If you are changing a paper roll, make sure you can advance the paper through the "throat" using the green knob and then manually trim it. If you are loading paper in the cassette tray, make sure you adjust the green sizing guides to match the paper dimension (8.5x11", 11x17), etc.
This requirement and solution are in the Plotbase manual, not the copier manual. See pp. 29-30 Setting for RW-240 ScanTool. 1. Start - Control Panel - Administrative Tools 2. Local Security Policy 3. Local Admin Policies 4. User Right Assignments 5. Lock Pages in Memory - Local Security Setting 4. Add User or Group, then Advanced 5. Add or Find Now - select users (all) 6. OK 7. close Local Security Setting windows
In admin mode, you need to add the client to printer permissions
You must be logged on as an administrator or a member of the Administrators group.
To assign this user right, follow these steps:
1. Click Start, click Run, type gpedit.msc, and then click OK. 2. Click Computer Configuration, click Windows Settings, click Security Settings, click Local Policies, and then click User Rights Assignment.
Windows XP was re-installed from scratch and the primary user, only user account, has administrator rights. Logging in under any user or password is not necessary. No restrictions have been set under any settings. Please help...
i have aproblem in my A045 Gestetner which when i send spme cad drwaings to print it from my pc it is says send to plotter but it not shows on the software of gestetner ploter ( after i do reload again for the machine it will comes very slolwy ) any clue plz ....... actually i'm using this device as shared with 100 person .
I have the same issure
×