Sound is barely audible even when volume is at 100 ... It sounds like it's all treble even though I checked the base, treble, balance, surround, etc. Should I replace the factory speakers??

Adjusting various sound settings (e.g. bass/treble ... - Sony

docs.esupport.sony.com/imanual/NA/EN/hx850/c_snd_qv.html

You can adjust various sound settings, such as bass, treble, balance, etc. ... [Setting Memory]: Applies custom sound settings to the current input or to common ...

General information on how to adjust the bass and ... - SONY

https://us.en.kb.sony.com/.../general-information-on-how-to-adjust-the-b...

Aug 15, 2015 - Follow this procedure to adjust the bass and treble surround parameters on the A/V ... Adjustable sound field parameters vary by sound field.

press the mode button, which is the audio knob repeatedly to choose the desired mode and rotate the knob until desired sound is obtained. as you press the mode button, the option will go from these followings: volume, bass, treble, balance, fade

On my yamaha 375 receiver if I connect digital or hdmi it disables the balance/bass treble etc but they work with anolog don't know if yours might be the same just abit strang if anolog doing it aswell

To whom it concerns, I'm wanting to know which button on the following Samsung remote I press to adjust the base in the subwoofer & adjust the treble??.... I'm finding with the surround sound system that this remote functions with that base is way to heavy & the treble/clarity of voice is not that clear unless the volume is way up....

Model of Samsung remote: "AH59-02341A"

If someone knows how to change these option functions for what I speak off above please let me know, Your help would be appreciated.

Email answer to: [email protected]

Some surround modes don't use the center channel. This is where most vocal tracks go to.

Check that your mic settings in the Volume control is not maxed out. Turn the mic off and see if the fuzziness clears up.

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Tries tv menu Sound Setting adjustment.Tries all the setting to the max like treble,bass,balance and surround sound is on.This should help make the audio louder.

Look through your receiver's DSP sound settings. When you locate the volume control for the center channel, adjust it to be in balance with the music and sound FX. Often, I just forget about the DSP and run the sound in stereo with subwoofer. Helps to minimize the different audio mixes between different TV STATIONS AND DVDs.

1. Yes, check to see if you have the volume up for the wave file turned up that is on the program you are using to listen to the Mp3 or sound wave with.
2. check the speaker connector/ Use another speaker that is know to be good and test. Use a set of earphone in the output jack also to test the output.
If these things are doing the same then you have failing sound card and it needs replacement.

my initial reply was...On the function button you may need to depress it for 3 seconds to activate base, treble, balance etc But
then I found this, "Rotary Volume Control: The CD receiver uses a 7-way rotary volume control that increases and decreases the volume of the stereo from 0 to 35. The rotary knob also controls other audio settings such as Balance, Fader, Bass, Mid, Treble and preset EQ settings. In addition, the rotary knob allows you to scroll through and select your music tracks when the Music Search function is activated.
Cheers, this should help ya.