I purchased a Reebok 8000 ES. After we installed

please see the video and fix it. God bless you

try to lube the deck belt +rollers bearing front+back+test drive belt motor, and replace if necessary.
However after you lube , the problem persist TIME to replace the old deck belt.

God bless you

yes, go to www.fitnessrepairparts.com or www.treadmillpartszone.com

God bless you

you to dissasembly read your instruction manual and proceed download from www.fitness.manualsonline. or www.iconservice.com

Dear Sir:

You can use any magnet , you can buy from any Hardware, the key is a magnet for procedure to turn on the machine.

sincerely. God bless you.

ernesto cuadra
managua, nicaragua

i had the same problem, i beleive its the motor it may have burnt out.
only had it less than 4 weeks, argos sent a replacement treadmill and took the broken one away.

1
check fuse(15 amp switch next to power cord connection)
2
check connections of power cable to switch

3 check power outlet

Hols the stop button and the speed decrease button down while inserting or attatching the key (magnet). There should be a "d" on the screen, press the incline down button and it should go away. As soon as it disappears, your done. Just pull the key off and your display will shut off.

Hope this helps

If you need further help, I’m available over the phone at https://www.6ya.com/expert/matt_8dbc24bf722649ac

No need to take console apart, power up the treadmill, take the safety key out then hold down the start button and the incline down button at the same time then insert the safety key. You'll now be able to toggle between KPH and MPH by using start button

Any magnet will do. Otherwise order a new one from the manufacturer, other retailer or ebay.