The default code is not working for my motorola blue toot h500

Well, try to press the Call button: it is the button that has got telephone drawed. Hold it until you see the blue light steadily lit. That means that you just turned on and putted the headset into pairing mode. Now find Motorola H500 over your mobile phone. You will need to put a pass, and it is by default (i think, on ALL Motorola Headsets): 0000. You're ready for using!

Hi, to pair the blue tooth device, you can use the default code for pairing the device i guess that will work.. No special code required for blue tooth to work. Just type 0000.and problem solved.

Thanks for using fixya...

Hello,

the default pin code for blue tooth is 0000. You can like wise try 1234 and 1111.

Take care.

Default code is 0000 (four zeros)

0000 - this code is default Bluetooth pairing code for the H500 and can't be altered.

0000 - This code is the default and cannot be altered.

To pair the headset, first turn off the headset if it’s not already off, hold the multi-function button until the LED light turns solid blue (not blinking blue) with an audio indication, then use your phone to discover and pair with the headset using “0000” as the default pass code.

the code is 0000

if that fails try 1234

all blue tooth devices are the same.

if that code fails then there is a problem with the device. Normally these arent repaired its replaced. Warranty will cover a replacement.

The passkey is default set for all Motorola headsets at 0000. try that. If this works, be sure to rate the solution. Thanks!

The default passkey is "0000". Try that & see! Please update the question & let us know if the information given was useful to you - Good Luck!