Got a fault code f11 on indiset washing machine

Question edited for clarity.
Question moved from 'Washing Machine' to Gorenge Dishwasher.

F11 - Water Outlet Fault

https://www.google.com/search?q=gorenje+dishwasher+error+code+f11

..

if its a Kenmore model then this message says that the button control board has lost sight of the main control board , but its been my experience that this maybe able to be reset and it may never come back or it will not reset and the control board will need replaced (50/50)


cycling power may reset this

F11 indicates a fault with the main control board.
Prepare yourself for a shock when you click on the parts link.



Click here for the part

Hi,

Please find the steps that needs to be taken for trouble shooting F11 fault code specially if there was a power cut.

1, Power off at the machine. Do the next 4 steps within 3 seconds.
2, Press Temperature Button in.
3, Power on
4, Release temperature button
5, press Soil Type button

You will now hear the door lock release so you can get to your pants.

Diagnostic code is now displayed. You can switch the washer off and back on and the error code is clear. If you do this it will work.

I am sure it would help you to resolve the issue.

God Bless.

f11 fault code is a problem with the main power board (could be blown fuse) or a blown board check the fuse the board is behind the back plate in the bottem right corner (looking from the back of the machine.(!unplug before you take apart!)

Hi there this is as it reads for your fault code F11


Serial Communication Error
Communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly.

• Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU)
• Check the Drive system for any worn or failed components
• Check MCU
• Check CCU
• Check Motor
• Check Wire Harness

F-11 like a Kenmore means communication error between the motor control and the main control. Check connections, unplug and replug computer connections and see if problem persists. I've seen cases where either board or even both can be bad.

To Clear F11 Code after a power cut.

1, Power off at the machine. Do the next 4 steps within 3 seconds.
2, Press Temperature Button in.
3, Power on
4, Release temperature button
5, press Soil Type button



Diagnostic code is now displayed. You can switch the washer off and back on and the error code is clear. If you do this it will work.

http://www.howtomendit.com/answers.php?id=40792