At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi Zandra, Thanks for using FixYa. Error code ND means “No
Drain issue”. To start with you’ll need to check for any restriction in pump
assembly. It can also be due to a restricted drain hose or loose wire at pump.
If after cleaning the drain hose the issue is not resolved then it means the
pump has gone bad and unfortunately needs to be replaced. Please
do rate the solution if the issue is resolved or post a comment for further
assistance. Thanks Rylee
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The ND means no drain. My Samsung front loader allows coins and other pocket debris to get through to the pump jamming the impeller. ND or SUDS is the error message. I have to use a shopvac to suck the water out through the drain hose and open the back to get to and free up the pump, The pump is easy to get to and easy to remove. Be sure to unplug the machine first.
ND is no drain error code for the FAV6800A and most Maytag machines.
Is there water in the Wash Basket. If not this could be a stuck Pressure Switch. If there is water in the Wash Basket then there could be a Drain Pump issue/Drain Line clog.
ND means no drain. You can remove the back panel to access the drain pump. Remove the hoses fron the drain pump and remove the clog. Watch out water will drain out when removing the hoses. hope this helps....
“F20” on display (Water Inlet Problem—no water or insufficient water supply)
Select PAUSE/CANCEL twice to cancel the cycle Unplug washer or disconnect power.
Check the following:
Are water faucets completely turned on? Are screens at inlet hose connection to washer clogged? Are water inlet hoses kinked?
Are water inlet hoses frozen?
Do rate the solution.
×