Have second hand lexmark e260dn and status light

http://support.lexmark.com/index?page=content&locale=en&productCode=&segment=SUPPORT&clearQuestion=Y&userlocale=EN_US&id=HO3026

That is a general printer error
Check for jams or blocks. you might have to delete the driver and clean the registry I use revo uninstall. then install the latest firmware
Sir Dana

You may download the Lexmark driver from http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_E260&segment=SUPPORT&userlocale=EN_US&frompage=null#1

You may download the Lexmark driver from http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_E260&segment=SUPPORT&userlocale=EN_US&frompage=null#1

Please check if the paper guides on the paper tray are correctly positioned. For example, if you are using a letter sized paper, make sure the guides are set to 8"x11".

You can download the drivers online: http://bit.ly/OCGFMb. Just choose the Operating System of your computer.

Solution: If you replace the toner cartridge and the 'Toner Low' message remains, the printer may need to be reset.
To do so, power off the printer. Let it sit 20 to 40 seconds, then power it back on. If the 'Toner Low' message does not appear on power-up, try printing again.
If the 'Toner Low' message returns on power-up or when printing, confirm the following:

• The toner cartridge you just installed is a brand new toner cartridge and not a used one.
• The toner cartridge is an original Lexmark brand toner cartridge. Cartridges manufactured by a third party may not be compatible with the printer.
  If a third-party cartridge is causing this issue, contact the point of purchase for additional support or replacement of the toner cartridge.
• The toner cartridge has not been refilled or refurbished by a third party. If it has, contact the place where it was refilled to have it replaced.

Still Need Help? Should you confirm all the above and the 'Toner Low' message remains, have the following available when calling Lexmark Technical Support;

• Printer model(s)
• Printer serial number
• Toner/imaging unit/waste toner bottle part number and serial number

Primero debes instalar el driver postcript para ese modelo, si no lo tienes descargalo en el siguiente link. Busca aqui el driver para tu sistema operativo.

http://support.lexmark.com/index?productCode=LEXMARK_E260&page=driversdownloads&linkSelected=node4^subnode3&locale=ES&userlocale=ES_MX

You can download the drivers from the following lnk.

http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_E260&segment=SUPPORT&userlocale=EN_US&frompage=null#1

We would like to know more about the second warning light you're referring to. Is it the second light from the left or from right side. The lights are represented by Error, Jam, Load Paper, Toner Low, Ready and Continue (green button).

For us to give the common light sequences, please provide us information if the light blinking, slow blinking or solid light.
For further assistance, please call Lexmark Technical Support.

This light sequence means that the printer has a service error, and printing has stopped.

Please Press Continue button (green button) twice to see the secondary code. The secondary error code will help locate the problem. Please take note which light will be flashing for this will reveal what problems you have on the printer.

For further assistance, please contact Lexmark Technical Support.