You need to find out if your hard drive uses a SATA connection or an IDE connection.You need to find out if your hard drive uses a SATA connection or an IDE connection.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You had better know what your going before you do this as it will erase the operating system too, making the disk unusable until you install the operating system again. Call Tiger Direct and buy an internal HDD adapter cable... it has a USB plug on one end and will allow ANOTHER PC to read it like a Flashdrive. Remove the HDD for our PC and connect the adapter. Using the other PC, format each directory separately, usually there are two: a C: and D:. You can also extract all the data files you have stored on the HDD BEFORE you reformat it. If you don't see files on the old HDD, use the START... type in "cmd"... then the old HDD name as listed in the other PC, for example, if it's Q:, use the command "CHG DIR Q:\" This will change to that HDD. Type in "TYPE DIR/W/P and all the directories should show up. If it's blank, you have a bad HDD and reformatting it won't help you. Buy a new HDD from Tiger Direct, at least 500GB at the fast spool speed. Have you original Genuine Windows CD-Rom ready and the key code and install it in your good HDD.
At boot up press F2 and enter BIOS. Here check if your HDD is recognized. If yes Ten your Windows is corrupted and needs to be reinstalled. How to install and save your data follow the link below:
Crashed Windows : No Problem If the HDD is not being recognized then run Auto Detect to recognize the HDD. If it works fine, if not then the HDD may need a change.
When you first turn on the computer then you change that using the bios menus. That's if you mean its a hdd password vs a windows. Also, you can try right clicking the hdd icon then choose properties. The security settings for it can be changed here.
You need to go into the BIOS and change the SATA type to IDE and not AHCI. I had this same problem on my laptop. Once I switched it to IDE it installed XP no problem. I don't know if Vista or 7 work with it set to IDE mode.
Re-seat the memory and the HDD connector. If no change try the mem modules one by one. If no change try it without the HDD connected to see if there is a problem with the new HDD.
You need to find out if your hard drive uses a SATA connection or an IDE connection.
×