Question about Quinny Buzz Three Wheel Stroller

1 Answer

Removing telescopic handle of Quinny Buzz?

Does anyone know how to remove the telescopic handlebar from the Quinny Buzz - I have a secondhand replacement, just need to get the original off to swap it over

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 17 Answers

Pull the handle up almost all the way, the plastic pieces that hold the handle in place come out by pusining in the little black plastic dot but the handle has to be in the correct position. Move the handle up and down till you can easily push in the dot. The handle should then come off easily enough

Posted on Jul 18, 2010

  • 3 more comments 
  • stefaniabb Oct 09, 2010

    I have the same problem with my Quinny Buzz; where did you find the replacement? I need one...

  • j33ffw Jun 13, 2011


  • j33ffw Jun 13, 2011


  • j33ffw Jun 13, 2011


  • j wid Aug 18, 2011

    ________ Quinnysales______ raise the handle bar to its top setting then lower 15mm ,that will allow you to push the round plastic tabs in that hold the collers in place ,then simply withdraw the handle,if you need new cables then call me on 07886531199 as i offer a unique repair service !!!!!



1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need the handlebar wires that make the height adjustable handle work on the quinny buzz 3 any ideas?

Hi - The wire from inside the Quinny Buzz handlebar isn't available as a seperate spare part item. To replace it, the entire handlebar is required, which comes complete with the inner workings. How old is your Buzz? If it is under 2 years old, please contact your retailer with your proof of purchase to make a claim under the terms and conditions of the warranty. If it is over 2 years old or you do not have proof of purchase please contact the customer service department for your country - for the UK this is 01284 413 141 Mon-Fri 8.30-4.30

Nov 28, 2011 | Quinny Buzz 3 Stroller

1 Answer

Quinny buzz 4 push handle release mechanism for extending handle - the steel wires have worn and snapped - How do you dismantle the push bar and where can you get the steel cables with the barrels on the...

Hi - The cable from inside the Buzz handlebar is not available as a seperate spare part item. To obtain a replacement you need to replace the handlebar, which comes with all the required inner workings. If your Buzz is under 2 years old please contact your retailer with your proof of purchase to make a warranty claim. If it is over 2 years old or you do not have proof of purchase you should contact your customer services department. If you're in the UK please call 01284 413 141 Mon-Fri 8.30-4.30.

Oct 05, 2011 | Quinny Buzz 4 Storm Stroller

1 Answer

Describe how to detach the adjustable handle bar for a quinny buzz

Good Afternoon

There are two little black circles just below the point of the handlebar where it extends - one front and one back, on either side of the handlebar. Push these in with a small point and extend the handlebar it will slide out of the chassis completely. You will need a second person to assist.

Jul 28, 2011 | Quinny Buzz Three Wheel Stroller

2 Answers

The handlebar adjustment cable in our quinny buzz has snapped - can you buy (and install) a replacement cable

hi you have to get the handle bar assembly and they are easy to change
here is a video of how to change one for the mothercare my3/4 but its the same as the buzz

which country are you in and i will try to get you a link to the handle part

Nov 01, 2010 | Quinny Buzz Three Wheel Stroller

1 Answer

I need to find a new handle bar for the quinny buzz as the handle bar will no longer extend

Dorel UK 01842 763 281 (Mon – Fri, 8:30 am to 4:30 pm) are the UK suppliers of all spare parts for the quinny range and can supply you with a new handle bar. It's likely that the grey button (handle bar extender button) is broken. This pulls up the little studs on the underside of the handlebar allowing you to adjust. Its a fiddly job but can be done.

May 31, 2010 | Quinny Buzz Three Wheel Stroller

3 Answers

Replacement foam for quinny buzz handlebar

Hello I am making handle bar, bumper bar and frame covers for the bugaboo and can probably help you with a cover.  Contact me at

Mar 08, 2010 | Quinny Buzz 3 Sulphur Jogger

1 Answer

How to I collase a quinny speedi sx pushchair

f the dreami carrycot or the maxi cosi car seat are attached, these will have to be removed first. Apply parking brake Release the handle bars by unclasping the silver clips on the frame. Push down handlebar to lowest height as you press in the silver button under the quinny logo on the very top of the handlebar( in the middle of the foam padding) with a downward thrusting motion. The chassis should then collapse for storing. To unfold then release the transport clip on the left hand side with the red sticker on it and unfold upwards adjust handlebar to required height and lock by closing the silver clasps either side of the frame. If you want me to do a pic/video demo let me know. HTH

Feb 03, 2010 | Quinny Buzz Jogger

3 Answers

Quinny Buzz Handlebar

I have the same problem too! To remove the handlebar set it to its longest position, then shorten it by 1-2cm. You will find that the plastic locking pin that you described is just a pair of lugs. With the handle bar in the above position you can then push both lugs in similtaneously while at the same time levering the plastic part out of the tube. when both sides are released the complete handlebar can be removed. From there it's fairly straightforward to strip down.

My problem now is that I can't find anywhere to get the parts from.

Any joy yet?

Nov 12, 2007 | Quinny Buzz Jogger

Not finding what you are looking for?
Quinny Buzz Three Wheel Stroller Logo

2,598 people viewed this question

Ask a Question

Usually answered in minutes!

Top Quinny Baby Gear Experts

Dorel UK
Dorel UK

Level 3 Expert

1637 Answers


Level 2 Expert

47 Answers

Tom Chichester

Level 3 Expert

55370 Answers

Are you a Quinny Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides