Question about Whirlpool LGR6611L Gas Dryer
Ok have u checked the hi and low relays for continuity these are both found aroundthat area as well and make sure you unplug yr machine before performing this test you also have an ignitor inside the unit which should be drawing 3.3 amps if it is lower then you should replace the ignitor hope this helps
Posted on Jul 18, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
The symptom you have indicates weak solenoid coils. The gas valve should open and the burner should ignite every time the glow bar igniter glows before it fades back off. Weak solenoid coils will usually open the gas valve until the solenoids become hot from the current and flame and then they don't have enough power to open the gas valve.
Replace both solenoid coils and your dryer will most heat and operate normally again. In order to access and replace the solenoid coils you will need to remove the front panel.
Nov 06, 2012 | Whirlpool Dryers
Dec 17, 2011 | Whirlpool Dryers
Dec 24, 2010 | Dryers
If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.
if you dryer is gas check out this gas no heat tip....
If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.
check out this electric no heat tip...
Dec 19, 2010 | Whirlpool LGR5636L Gas Dryer
Oct 20, 2009 | Whirlpool LGN2000LWH Gas Dryer
Aug 15, 2009 | Whirlpool LGR5636L Gas Dryer
Aug 14, 2009 | Whirlpool LGB6300 Gas Dryer
Jun 26, 2009 | Whirlpool Dryers
Mar 22, 2009 | Whirlpool LGR6611L Gas Dryer
Jan 09, 2009 | Whirlpool LGR6611L Gas Dryer
436 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: