WHERE CAN I GET A REPLACEMENT MANUAL FOR MY NEW HOOVER VACUUM BOUGHT IN NORTHERN IRELAND

Google Hoover vacuum manuals....consider this...how much will a
motor cost? How much will a new vacuum cost? I point this out
as I have no idea of what kind of vacuum you have.

Regards.
Dennis

Hi,

You can Hoover parts at the following:

Sears
1500 Cumberland Mall
Atlanta, GA 30339

and
Buckhead Midtown Vacuum
2000 Cheshire Bridge Rd NE
Atlanta, GA 30324


I'm a northerner and not sure which is closer, but hope this helps.
If it does, please place a vote for me.

Thanks,
Handie Andie

Hello,

Your vacuum cleaner originally came with Hoover belt part number 38528027, however Hoover has now discontinued this part number, and replaced this belt with the new belt which is part number 38528040.

The new belt is a little bit smaller then your old one, but unfortunately this is the only belt that Hoover currently makes that will fit your model.

Here's a direct link to our website if you still need to purchase one:
http://www.govacuum.com/agbelhoovpar7.html

I have also uploaded the parts diagram and instruction manual for you. The parts diagram gives you every single part number for all parts on your vacuum should ever need to know another part number. The owners manual will give you step by step instructions on how to change the belt, as well as other maintenance instructions.

Part Diagram for Hoover U5227-930:
http://lib.store.yahoo.net/lib/vacuumcleanerbacgs/Part-diagram-hoover-u5043-930.pdf

Owners manual is actually for the commercial version of your vacuum, but this will be identical to your instruction manual which Hoover doesn't have available for free:
http://www.hoover.com/pdfs/manuals/C1414900.pdf

I hope that this information was helpful to you. If it was, please be so kind and rate my repair helpful by clicking the thumbs up icons in the top corner of the repair.

Thank you very much,

Chris J.
GoVacuum

Please use the following link.
http://www.hoover.com/pdfs/manuals/U5180900.pdf

download the manual for hoover model F5810 on hoover .com. same manual for F6020-900, just slight difference

what is the belt # you have installed (generic)? Yes, there are problems with using generic belts on Hoover Vacuums. If you have noise I would suspect the roller, and replace it. the cost is about $25 and is something that you can install. The newer type are mande of wood and are very quiet.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_b96ba3f038cf317c

http://geeksquad.fixya.com/ThreadView.aspx?prdid=40471&thid=603805
I just bought a Hoover
Posted by serdmann4 on May 17, 2008
I just bought a Hoover floor mate for hard floors. The problem is the water with cleaner is not coming down to the bristles at all. Help please. It is brand new. Any ideas???

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Hoover Floormate H3000 Upright Wet/Dry Vacuum. You can down load the owner manual from the Hoover website www.hoover.com . It looks like the one of the holding or recovery tanks my not be in place, leaking, cracked or damaged, or the clear tube is leaking and needs replacing. I looked 2 the owner’s manual and it does not show the clear tube but the vacuum does come apart and just back track the clear tube and mark the screws when you disassemble the unit. Other wise , please call the factory or a local Hoover warranty station in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST
Thanks, Don the Vac Man
Go Ahead. Use Us.

Hoover.com doesn't have a manual specific to your model but there is one similar which will show how to remove the upper handle from the body.

http://www.hoover.com/pdfs/manuals/U5467900.pdf

Do you have a replacement switch? If not I believe you can buy one from Hoover (the switch and/or the upper handle assembly). Unfortunately your model isn't listed on the website, is this a new vacuum? I recommend giving them a call, that would be the easiest way.

Also remember when working with electronics to unplug the vacuum. Even when there is no power residual electricity can remain in the wires. If you feel unsure, take it to a repairman.

Hope this helps!

cant help with manual but if i may why would u take it apart theres not much to service but to take the belt off turn the machine over and down by the roller there are a few screws take them out the cover should come off and thats it