My 32" tv had the fuse go out. when i replaced it the light came on but still no picture. not sure where to go with that
I have almost same problem with you only my Q7 on the power supply was fried and i don't no the p/n the ps board p/n is fsb228-3f01
Details on repair power supply FSP228-3F01 TV ViewSonic N3260W, please visit repair TVs
You need to find out if it is putting out the 24vdc needed by the backlight inverter board, you may have bad shorted out inverter board that may have taken out the fuse, you need to do some probing.
Power supply pin out: http://www.fspgroupusa.com/images/specs/FSP228-3F01_SPEC.pdf
Power supply: http://www.shopjimmy.com/fsp-fsp228-3f01-power-supply.htm
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:
Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Please post back what you find.
832 views
Usually answered in minutes!
×