I want to buy a Technics SA-DX940 reciever

I used the manual downloaded from http://www.manuals365.com/technics/sadx940.html

Try using the final stereo output of the mixer as the input to the CD or Tape or VCR inputs.and use the switches on the fromt of the DX940 as necessary.
The specificatios state input sensitivity is 27 mY so your mixer needs a low output..
No reason it shouldn't work.

Look on the Panasonic website.

if you search your make and model of reciever on the internet, you will find several web sites that wish to sell you a remote for your device

Free PDF Manual at the link below.

http://www2.panasonic.com/consumer-electronics/support/Audio/Technics-Audio-DJ/Technics-Receivers/model.SA-DX940


Please leave rating.

Cheers

Andy

try http://www.chung-sim.com/panasonic.sa-gx370.html

The Technics SA-DX940 is made by Panasonic. The manua as a PDF is available here: http://service.us.panasonic.com/OPERMANPDF/SADX940.PDF . The directions for connecting the speakers start on page 14. The connection to the TV is on page 10. To use the SA-DX940 as just external speakers for your TV, connect either the digital audio out from the TV (if it has one) or the RCA audio out from the TV to the matching TV audio in on the SA-DX940.

I hope this helps.

Cindy Wells

A replacement can be found here:

http://bestbuy.partsearch.com/Part/Matsushita/Panasonic/EUR647132/New.aspx?ModelMfgName=Matsushita&ModelBrandName=Technics&ModelNumber=SADX940

Most likley it is in need of repair. I suspect the output IC. Check for bad solder connections on the IC and voltage regulators.
Remove the speakers and see if it still happens (it probably will).

Make sure you are using a digital connection, optical or coaxle cables must be connected, setting on receiver must match cable being used

http://service.us.panasonic.com/OPERMANPDF/SADX940.PDF
This is a pdf that has everything for the remote and reciever