I have a Dynex 37" LCD and when I power it on, the green light turns on and I get sound but no picture. I power it off and then turn it back on again right away and I get the picture and sound. I have to do this everytime I turn on the TV. What could be wrong and how can I fix it?
You may either poor 24vdc power supply problem or failing backlight inverter board, you need to check the voltages before and after the set acts up.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:
Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Please post back what you find
502 views
Usually answered in minutes!
×