I have HP1320 printer when i send the print command printer paper out blank no printing?

It seems you are using a print server to connect the printer 1280 to your LAN. Uninstall the printer software and printer server driver. Connect the print server to the network and first re-install the print server driver. Then connect the printer to the print server and install the printer software. Refer user manual for assistance. Bot the print server and printer software should be compatible with your operating system.

Wrong printer drivers for your computer or else they did not install properly. Also blank page may mean you are out of ink/toner.

hey ,. in printer preference change the paper type to plain paper./.

check the settings first and then services afterwards loose static and restart complete system

When the print cartridge contacts are dirty and the printer cannot detect/communicate with print cartridge.

Clean the contact points on the cartridges with a dry, lint-free cloth.

1. Open the top cover of the printer.

2. Remove the print cartridges.

3. Clean the copper-colored contact points on the cartridges with a damp, lint-free cloth.
Use a dry, lint-free cloth to remove moisture from the contacts.

5. Insert the cartridges back into the printer.

6. Close the top cover.

7. Try printing again.

If you still cant communicate try with new cartridge .
 
Hope this help. Please Rate My Response! Thanks! 
PREM

either your paper size settings need to be adjusted in the software, or your setup has included a seperator page.

First customize the paper size in the Page Setup. Secondly when you send command for print, change the paper size to custom size from the Printer Properties and click print. On the other hand, you can select the paper size from the printer's menu itself after sending the print command. Please make sure that the right driver of the printer is installed on your computer.

Hope it will help and fix your problem.

i need driver off the printer hp deskjet 9803

my Email [email protected]

three possible problems,

1 did not pull out strip from cartridge

2 HVT gone bad

3 contacts on cartridge or printer has a problem