Question about Beko DSV64W White Vented Tumble Dryer 6 kg, 9 Cycles
Go into service mode and reset
to do this move to delicates turn on dryer and keep
pressed down cancel button for about ten seconds release
then all lights should flash when you press cancel again machine will go through test mode , then just turn machine off
it is now reset, this worked for min a drcs68w
Posted on Aug 20, 2008
How do i change the thermostat on the beko drcs68w
Posted on Feb 16, 2011
Where is the cancel button.
I have tried
setting the dial to delicates then turning on the machine. Pressing down the start/pause/cancel button for 10 sec then release. Press the start/pause/cancel again but not all lights show the machine just starts its normal cycle.
I cant seem to get all lights to flash and get the machine in test mode.
Any further assistance would be a great help.
Those buggers at beko dont even supply real online help or manuals.
Posted on Sep 21, 2008
Turned the dial to delicates hold down the buzzer cancel button (one on left) and turn on machine. After a few seconds the lights flash and the buzzer goes off. This is all very well but problem of 'no heat' remains so I'm putting it down to a dead heater (about £40+fit).
Posted on Jan 08, 2010
My tumble dryer wont heat up either, when i turn off machin and hold down cancel button then turn machine on all the lights flashes but then when i press start button it make a loud buzzing noise and still no heat.. can any1 help me asap please...
Posted on May 03, 2012
My tumble dryer is making a rerrible noise
Posted on Mar 29, 2011
Unscrew back cover and press reset button on the bottom thermostat directly above heating elements (the one with the blue wire running to it). It will have likely tripped due to opening the door during the cycle (fan turns off while heater keeps going for a while) or due to blocked filters. If this does not work ( you'll hear a click when pressing the reset button only if it has indeed tripped) then the thermostat is likely broken and you will need a new element and thermostat set. Easy to fit if you do need to.
Posted on May 13, 2014
I cleaned the heat exchanger really well (Like I shold do monthly, but don't) and mine now works!
Posted on Dec 14, 2011
Check heating element first.
Posted on Jan 08, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jul 21, 2016 | Dryers
Aug 27, 2014 | Beko DRVS73W Vented Tumble Dryer - White
Feb 11, 2014 | Dryers
May 28, 2011 | Audio Players & Recorders
May 28, 2011 | Dryers
Feb 07, 2011 | Dryers
Apr 17, 2009 | Frigidaire GLER331A Electric Dryer
Mar 12, 2009 | Dryers
Aug 05, 2014 | Beko DSV64W White Vented Tumble Dryer 6...
34,001 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: