How to unlock the MENU button on my TEAC RC-1058 remote control

Switch off and back on. Disable auto tune and do manual setup.

what region is it playing now and where from the unit was bought??

please give the inputs sir. we will be happy to help you

This is everything that I have:


Try this general bush unlock:

Press Open tray

Press 2, 8, 1, 2 and Enter to get to the manufacturers settings

Select the required region, by pressing Enter on 9 for multi region

Press Close tray

If that didn't work, try this:
Try this one:
1. Press the Open button on your remote control to open the drive tray
2. Press the 9 button on your remote control
3. Press the 7 button on your remote control
4. Press the 3 button on your remote control
5. Press the 5 button on your remote control
6. Using the on screen menu, highlight the region option
7. Press the Right button on your remote control
8. Using your remote control, select 1 for region 1, 2 for region 2, and so on, or 0 for multi-region playback
9. Press the Enter button on your remote control
10. Press the Open button on your remote control to close the drive tray


Then there is the following and good luck:
Bush 1000

1. Open the tray
2. Insert a disc with desired region code, but do not close the disc tray
3. Press 0, 1, 2, 3, Play

Bush 1005 / 2004A / DVDAV7

1. Press the OPEN/CLOSE on the remote
2. Press 3, 3, 0, 8, 8
3. Press the button for the desired region or 0 for multi-region
4. Press OPEN/CLOSE
5. The on-screen display will now indicate the currently selected region

Bush 2000

1. Open the disc tray
2. Insert RC-1 DVD, don't close the disc tray
3. Press 0, 1, 2, 3
4. Press PLAY

To activate RC 2:
1. Open the disc tray
2. Insert RC-2 DVD, don't close the disc tray
3. Press RETURN and PLAY

Bush 2002 / 2004

1. Press OPEN
2. Press 7, ENTER, 7
   A menu should appear (codefree=13)

Method 2:
1. Press OPEN
2. Press 2, 0, 0, 1

Bush 2005 / 2008 / 2009

1. Turn on the player
2. Press OPEN/CLOSE
3. Press ZOOM
4. Press A/B
5. Press Up, Left, Down, Right
   A note should be displayed.
6. Turn it off
7. Turn it on

Bush 2023 / 2024 / 2523

1. Press OPEN
2. Press 2, 8, 1, 2, Enter
3. Set the country code to 13 and press Close

Bush 2028

already region free

Bush 2039

1. Press OPEN
2. Press PROG
3. Press ENTER three times
4. Use UP/DOWN to select region
5. Press STOP several times to set the region

Bush 2047

1. Press OPEN, SETUP
2. Go to "Preferences"
3. Enter 2, 8, 1, 2
4. Use UP/DOWN keys to select the region
5. Press SETUP, OPEN

Bush DVD-102

1. Press OPEN/CLOSE
2. Press 2, 0, 0, 1
3. Press ENTER
4. Select RC (codefree=13). You can disable MacroVision, too.
5. Press OPEN/CLOSE

Bush DVD-142TV

1. Press DVD function on your TV set
2. Press DVD Setup on the remote
3. Press 1, 3, 6, 9
4. Press Left three times
5. Press RIGHT once
6. Select VERSION
7. Change the region code

Bush DVD-143TV

1. Press DVD/TV, DVD
2. Open the tray
3. Press SETUP, Right, Left, Down, Up, Display
4. Enter 0 (or 1-6 for other RC)
5. Press Enter

VCD/SVCD playback
1. Press SETUP on remote
2. Press Next, Prev, Next, Prev
   Ver should appear in the top right
3. Change 3001 to 3000
4. Change 5001 to 5000

Bush DVDAV11K

1. Open the tray (be sure to be in stop mode)
2. Press SETUP, Next, Prev, Next, Prev
3. Select 255 for region free (use LEFT/RIGHT)
4. Press SETUP

Bush DVDR3000

1. The disc tray has to be empty
2. Press TV/DVDR
3. Press RETURN, DISPLAY
4. Enter 8, 8, 8, 0

Bush DVHS1

1. Press the DVD button on the remote
2. Press OPEN
3. Press 0, 5, 2, 0
4. Press UP, DOWN, LEFT, RIGHT
5. Change the region (0 = multi-region)

Bush DVRHS02

1. Push SETUP button on the remote
2. Select SYSTEM INFO on the menu
3. Enter 1, 1, 0, 1
4. It shows the current region code
5. Push 0 on the remote for region free

Bush 2001 / 2020 / 2026 / 2029 / 2035XI / 2038 / 2042 / 5020 / BTV213DVD / DVR3000 / DVRS01 / PDVD0707 no known hacks

When all else fails read the owners manual page 35:

"• To unlock the buttons on the remote control by using the
touch sensor panel of the main unit (see page 25):
1 Press MENU to display the MENU screen, and then
press VOLl/k to select "System Options".
2 Press CHs/r to select "Operation Lock Out", and
then press INPUT.
3 Press CHs/r to select "Off", and then press INPUT.
4 Press MENU to exit.
• To unlock the buttons on the TV, press MENU on the
remote control, and then select "Off" in "Operation Lock
Out".

Press Menu Button from any Remote control ( RC) by which could turn on your TV, press menu , menu drop down list will be visible on ur screen then wait 4 a minute or more till ur RC stop blinking , then go to Preference menu , go to FPA lock, turn it off. enjoy.
Deva

TO UNLOCK THE REGION CODE ON THE PLD 2100 DO THE FOLLOWING:

1. "POWER ON"
2. OPEN THE DVD TRAY
3. USING THE REMOTE CONTROL, PRESS AND HOLD "RETURN" BUTTON AND PRESS "CURSOR DOWN" "V" BUTTON.
4. RELEASE "RETURN" BUTTON AND PRESS THE NUMBERS " 2 ; 3 ; 7 ; 9 ; 2 ; 2 ; 2 " IN SEQUENCE.
5. PRESS CURSOR DOWN "V" BUTTON UNTIL "MAINTENANCE MODE" NUMBER ON TV SCREEN CHANGES TO "0"
6. PRESS "ENTER" BUTTON TO STORE.
7. "POWER OFF" THEN "POWER ON"

DVD Player is now REGION CODE FREE..........Enjoy the movie!

You can have a service manual at
http://www.user-manuals.com/advanced_search_result.php?keywords=teac+pld+2000&x=11&y=14

1. Press Open/Close on remote control. DVD tray opens. 2. Press the following buttons in sequence: 2, 8, 1, 2. 3. TV displays "Region 2" 4. Press the Enter button on the remote until code changes to 9 5. Press the Open/Close on the remote. DVD tray closes. 6. Press Power on the remote control. Now code free...

If you forgot your password for this feature, press the following buttons on the remote, one at a time. (Note: You must be in the password entry screen) Press, Mute, Display,Clear and Reset, this unlocks parental controls and you can now re-enter a new password.
OR TRY THIS..
Press and hold Menu on the TV AND volume down on the remote for 3 seconds. Nothing will appear on the screen, and the Parental Controls will unlock, and you can re-enter a new password with the LOCK PARENTAL CONTROLS
Bill

If you have the original remote (RC-A07) for Sinotec tv, then press and hold down the music button for about 10 seconds. This worked for me.