Question about Sharp LC32D44EBK 32 in. LCD TV

1 Answer

Tv is automatically switching to stanby mode after a few seconds

Tv is powering on and then switching automatically to stanby mode

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,099 Answers

Hello,

Power supply board have problems,just not dead yet.Replaced the power supply board,will solved this problems.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Hope this helpout......

Posted on Aug 03, 2010

Testimonial: "your a star thank you"

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just connected the main board A1727318A to Sony tv KDL-32XBR9


How many blinks do you have?

Main Power 2 Times (PS Board, G2CE Board)
DC Alert 3 Times (BM3 Board, G2CE Board)
T-Con 4 Times (T-CON Board)
HDMI 5 Times (BM3 Board)
Backlights 6 Times (Inverter Board)
Temp 7 Times (BM# Board)
HFR Error 8 Times (LCD Panel)


I hope that it will help you.

Apr 02, 2015 | Sony Televison & Video

1 Answer

When tv goes on stanby it starts scanning


The firmware corrupted. Contact the authorized service centre.

Apr 09, 2014 | Televison & Video

1 Answer

Emerson lc370em2 will not turn on just flickers


Hello Mike, seems you have a problem with your power-supply board....*or check if the tv switched back into standby mode..if tv switched back to stanby mode .....please check your A/V <Main proccessing Board...
Hoping to inform you correctly I remain,
Yours friendly.

Blessings.


Gladmar.

Mar 15, 2014 | Emerson Televison & Video

1 Answer

Tv is in stanby mode. when i turn on power it seems like it wants to start but nothing comes up on screen. stanby light is blinking


The problem is in the main board of the tv, it is either a power supply issue or a high voltage problem. In order to isolate you will need a tv tech to check the set out and cost involved.

Jan 07, 2011 | Sony FD Trinitron WEGA KV-34HS510 34" TV

1 Answer

How do you disable the stanby timer by power


U can't stanby mode indecation power is there,for ready to go to power when power go to high voltage.

Oct 06, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Turn off tv power


First your tv will always go into "Standby" when it receives a "Power off" signal. Made that way. Second, It is never a good thing to have your tv power plugged into a "Switched" outlet on a Cable ot Sat box or some other Component. The tv should be always be plugged into the wall outlet or through a very good surge protector.

Jul 12, 2009 | Televison & Video

1 Answer

Can't turn on from Stanby mode


I would assume the power board has a problem. A tech could possibly repair it without replacing the whole board.

Nov 13, 2008 | Pioneer PDP-5070HD 50 in. Plasma...

1 Answer

VCR automatically goes into standby mode


If this unit shuts down after you turn it on, it is going into stanby because the microprocessor is not seeing the proper pulses from the mode switch. this could be due to an out of time mechanism because of a broken gear, bad mode switch, the loading basket is out of time or broken, or the capstain motor or the cylinlinder motor is not sending the PG and FG pulses to the microprocessor. These can also be due to a power supply voltage missing. You can check the voltages with a service manual and make sure they are not low. You will also need to get the mechanism manual and check the timing of the mechanism. Then check the mode switch you can get a manual from here http://www.servicemanuals.net/results.aspx?brand=15&model=HRS&type=SM&pos=281 Good Luck

Mar 21, 2007 | JVC HR-S9900 S-VHS VCR

Not finding what you are looking for?
Sharp LC32D44EBK 32 in. LCD TV Logo

Related Topics:

963 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...