At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
i have the ultimate care II and the spin cycle is moving so slowly. i have to spin loads several times in order to have them ready for the dryer. help!i have the ultimate care II and the spin cycle is moving so slowly. i have to spin loads several times in order to have them ready for the dryer. help!
AnonymousMar 20, 2014
WON'T SPINWON'T SPIN
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Machine not spinning....check]
1..all water gone clean pump trap and check blocked drain
2....somehting stopping drum spin drum freely by hand.
3....too much soap use low suds soap and very little of it.
4....motor brushes wearing out...call for service for this one.
Good luck
T
I DON'T KNOW, BUT I WOULD CALL YOUR REPAIRMAN RIGHT AWAY AND SEE IF HE CAN CHECK YOUR PROBLEM. I AM NOT AN EXPERT, BUT I DO KNOW WHEN SOMETHING NEEDS TO BE FIXED, I LEAVE IT TO A EXPERT.
RODNEY
Your basket drive is grabbing. the only way to stop that is to locate the clutch and the tube directly above it is your basket drive put a little white lithium up there. but not in the clutch. this will solve that problem. But if you do not know what you are looking for this will be difficult to locate.
The brake assembly is failing ,try this if you can,loosen the 3 transmission bolts about a quarter inch and try it in spin.If it picks up speed than you are going to be due to have the break assembly replaced.High cost repair. :(
if its a 2 piece agitator.. the gears in top of agitator is stripped out.. change gears be like new....spin top countor clockwise if it dont grap.. gears bad
mine is doing the same thing; it will wash but it won't spin
i have the ultimate care II and the spin cycle is moving so slowly. i have to spin loads several times in order to have them ready for the dryer. help!
WON'T SPIN
×