I dont know what each colour means to conect to my new cd player

Male sure the disc plays on another machine. The lens might be dirty. You can buy cleaner at walmart. Then I would take it in for service

buy a ready made connector block

go to salvage yard and get a plug then go to auto zone for after market radio wiring with plug
if you have original plug in car still just buy the plug from auto zone

Yellow wire...see page 2.
http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/370967688DEHP2900MPInstallationManual1027.pdf

Can you please post back, LG,can not find any devise with model# m6500r or lac-m6500r.

Here you go my friend:

http://www.pasbuy.com/download.asp

All the best
Sean
PiDigital.co.uk

i can't download music to my phillips gear mp3 player

if you have the wire connector it's easy.....give the negative conection to the body of the player..find the wire from the battery with has the power supply even when the switch is off..and connect it to the yellow wire.that is for the memory...find the wire which has the power when the switch is on ,and connect it to the red wire from the player....what i mean by switch is the ignition switch... u can easily find the speaker connections...most speaker wires comes as blue,ash,green,white...there are two wires from each colour......

Hi,

To my knowledge, Pioneer uses the blue wire to provide the +12 to power antennas.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

can you be more specific dont know if your refering to wire loom, light(luminesence) ect post new comment