Logiteck quick cam communicate STX

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

Normal 0 Try disconnecting the Camera from the USB port and reinstall the CD software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Hope this helps. Bud

pls solve this problem

Try downloading the latest drivers for your webcam. Drivers available at http://drivers.softpedia.com/progDownload/Logitech-QuickCam-Communicate-STX-Download-14375.html

hello milbe


check for them here Logitech > Support + Downloads



riz.

Normal 0 Try this:

In some cases, the preview capture may not appear only a black view.
To fix this:
- Unplug the web cam and plug it back in.
- Or -

Lower the video resolution of the.
Hope this helps. Bud

go here
http://www.logitech.com/index.cfm/435/352&cl=us,en
Sergio

Normal 0 There are a number of things that can cause the computer or the camera to freeze up or slow down.
First I’d check to see how much memory is installed in the computer. It takes additional memory to operate the camera.
Hope this helps. Bud

well, i finally found the website for logitech and found an article on there from a tech guy, (i guess that is what he does) the article was titled, "How to make your logitech camera work in an im." when i read that i followed the instructions and know it is not my cam, but the messenger i was using. i don't know what to do about that because it is yahoo and there support is NILL!!!!!!, i repeat NILL!!!!!!!!!!!!!! it takes some finding (the article) but it says to try your cam for 5 minutes making a video from quick capture. if it works ok then it is the website and not the cam. may i say yahoo stinks! also he said that it is 99% of the time the website is the problem. not a quote. hope this helps someone out there that is having the same trouble.

hay there well it should work when you press on the cam in the bar in the top left ok hope it's whould you didn't think about