At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your Ricoh MP5000 printer is displaying the "Please Wait" message, it may be due to a problem with the printer or an issue with the print job. Here are a few things you can try to fix the issue:
Restart the printer: Sometimes a simple restart of the printer can fix minor issues. Turn the printer off, wait a few minutes, and then turn it back on again.
Check for errors: Check the printer's control panel for any error messages or codes. These messages can help diagnose the problem.
Cancel the print job: If the "Please Wait" message is displayed while a print job is in progress, try canceling the print job. You can do this through the printer's control panel or by using the printer's cancel function on your computer.
Check for paper jams: If the "Please Wait" message is displayed while the printer is attempting to print, there may be a paper jam. Check the printer for any jammed paper and remove it if necessary.
If these steps do not fix the issue, there may be a more serious problem with the printer. In this case, it is recommended to contact Ricoh customer support or a printer repair technician for further assistance.
On the bottom right edge of the Windows screen, you should see a printer icon - if the printer is trying to print. When clicked, it will display its status. You can select "Quit Print Job" to stop a job from printing.
Most printers don't have a cancel button. You get to "cancel" by going into your computer START menu then selecting CONTROL PRINTER then select CANCEL PRINT JOBS. In the future, I found the safest way to avoid accidentally printing more than intended is to always select "Current Page" when ordering a print job.
I hope that helps.
wait 1 min, then reconnect printer to your computer.
then plug printer back in and turn it on.
Start your print job over.
Should the paper jam suppossedly still exist, cancel the print job and run the maitenance program off the printers' menu that is stored on your computer.
Start print job again.
Should the problem still exist contact support at Samsung via the links on their homepage.
Manual Feed Command. 1. Press the Job Cancel button to cancel the print job. Delete the print job in the print queue on the computer. You can quickly access the print queue by double clicking the Printer icon in the task tray or dock.
2. Turn the printer power switch OFF on the right side of the printer. Check that the front cover is closed.
3. Turn the printer power switch ON while holding down the GO button until the Toner, Drum, and Paper LEDs are lit.
4. Release the GO button. All LEDs will be off.
5. Press the GO button 8 times. The green Status LED will flash briefly while the printer is reset. After the printer is reset the Status LED will be lit green.
6. Print the Print Settings by pressing the GO button three times. If the Print Settings pages do not print and the Paper LED is on again skip to the next section - No Paper in the Paper Cassette.
If the Print Settings pages print, the problem is isolated to printing from your computer. The Paper Source of the Brother printer driver or program you are printing from may be set to MP Tray or Manual, instead of Auto Select, Tray 1, or Tray 2 (if the optional paper tray is installed). To check the Paper Source setting of most programs, click File and Page Setup or Page Layout. You may need to click the Paper Source tab or Paper tab depending on your software application. Verify that in the Paper Source section does not list MP Tray or Manual. Choose Auto Select, or another relevant source such as Tray 1. Click OK. Try printing the document again.
No paper in the paper cassette. 1. Pull the paper tray completely out of the printer.
2. Insert the letter or legal size paper into the paper tray with the top edge of the paper first and the print side down. Make sure that the paper is flat in the tray and below the maximum paper mark. If using a paper size other than letter or legal, the paper should be loaded in the MP Tray. The MP Tray can print on paper from 2.75 in. by 4.57 in. up to8.5 in. by 16 in.
3. While pressing the blue paper-guide release lever, slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots. For legal size paper, press the lever located at the back of the tray and pull out of the back of the open tray.
4. ReinstalI the paper cassette back into the printer. Press the GO button. If the alarm clears, no further troubleshooting is needed. If the alarm continues, follow the steps below.
Paper Jam at Paper Pick-up. 1. Turn the printer power switch OFF on the right side of the printer.
2. Remove the paper cassette from the printer.
3. Elevate the front of the printer slightly to locate the jammed paper.
4. Gently remove the jammed paper.
5. ReinstalI the paper cassette back into the printer.
6. Turn the printer power switch ON. If the alarm clears, no further troubleshooting is needed.
Try this: Press MENU, select FAX, then scroll down to REMAINING JOBS. If any jobs are displayed , you can choose to print them. To print from the fax memory, first exit out of the MENU functions totally. Then, press MENU,2,5,4. Next, press START. After all faxes in memory have printed, press STOP/EXIT button. Check REMAINING JOBS again, if it is clear, fax memory should be clear, Also.If the fax machine has a PRINTER function, press the JOB CANCEL button to clear the print Queue.
×