Hi,
All powered treadmills have a breaker. The purpose of the breaker is to prevent a power surge that might damage the treadmill motor.
Thanks for using fixya,
Good luck and have a nice day.
Hello,
Power issues with treadmills fit into two categories: the power
does not turn on or the power shuts off when using the treadmill. If the
power will not turn on, make sure that the treadmill is plugged into a
working power outlet. In addition, you should use a single-outlet surge
protector for the treadmill. Single-outlet surge protectors protect the
machine from any voltage changes that may occur in your home.
If
the machine is plugged into a working outlet, make sure the safety key
is in the keyhole on the console. If the safety key is not plugged into
the machine or if it is pulled out during operation, the treadmill will
not operate.
Finally, make sure the circuit breaker located on
the frame near the power cord is set to "Reset." The circuit breaker is
set to "Reset" if the top of the button is pushed in. When the breaker
is tripped, push it back to the "Reset" position and wait five minutes
before powering on the treadmill.
If the treadmill shuts
off during operation, check the power cord and circuit breaker as
described above. You can also try removing and reinserting the safety
key.
Take care.
Hi,
This message appears when you remove the Safety key.
Kindly provide me with the make and model of the machine?
Are you sure that the key is intact? Is it properly placed?
Thanks!!
Thanks for your response!!
Hold on.......Thanks!!
The model number you gave does not match with any of the one i have in the database. Could you provide me with Brand name? When did your purchase this treadmill?
If your treadmill powers up
and displays all 8s but will not operate, the Limited Access Switch has
been activated. The treadmill will not operate unless the magnetic key
is in its place on the display or the Limited Access Switch has been
deactivated.
How to Deactivate the Limited Access Switch:Press POWER to turn off the treadmill
At the same time, press and hold the +, -, and POWER keys.
Continue holding all keys until the 8s on the display disappear.
Release the keys.
The Limited Access Switch will remain deactivated until the magnetic key is put in its place on the display.
Let me know the progress.
Good Luck!!
Thanks!!
Thanks for your response!!
The model number does not seems to be valid. At least provide us with brand name of the treadmill. I could even help you to repair it.
I hope i have been helpful.
Thank You!!
×
657 views
Usually answered in minutes!
model cxt f9cx00166
it is still not
pls talk to me
it is not working no matter what
it seems like you canot find answer i hope you dont charge
×