Tally Dot Matrix T2265C Printer Logo

Related Topics:

Posted on Aug 25, 2010

I use tally.ERP9 and also used TVS dot matrix printer, printing speed is very slow

4 Related Answers

LineMatrix

Toby

  • 34 Answers
  • Posted on Sep 10, 2009

SOURCE: IBM 6400 Dot Matrix Printer - Need Drivers for Windows XP

Try running couple of these test, to see if it might be another issue.
It should be printing these test at 1500 Line Per Minute... ?
1500LPM is at 10CPI if you have (Font size: 6, 8, 12, 14) it will make a difference.
Change your driver to Generic/Text, rerun your report... any difference?
abdd6e9.jpg

Ad
MUKHTAR

mukhtar21 shaikh

  • 2022 Answers
  • Posted on Feb 15, 2010

SOURCE: epson lx 300 dot matrix printer not printing properly

Make sure you installed correct printer driver and choose the correct model .and remove the pending print job if it is there.
To clear all pending job
In run window type services.msc and the go to print spooler option just stop and restart the service. And switch off and switch on the printer.
Have a nice day and do not forget to rate please...!

Anonymous

  • 1 Answer
  • Posted on May 20, 2010

SOURCE: How to increase the speed of Dot Matrix Printer using CrystalRpts

In the .rpt file select the printer fonts (they will have a printer icon next to them). These will print faster than truetype fonts.

LineMatrix

Toby

  • 34 Answers
  • Posted on Oct 15, 2011

SOURCE: paper motion fault

This info is from the Maint. Manual for T6212/T6215/T6218.
gp+3ytmzowxemaaaaaelftksuqmcc


xotihxffu1saaaaasuvork5cyii=Sensor is located below the upper left tractor item 99 below. Clean it and make sure the V is facing your holes in the paper. If that isn't the problem? see below how to meter sensors procedures...
0tzegsr+ic4n46ssuqv4el30qgpfj8tqefx2f8bvlqvvrw0muuaaaaasuvork5cyii=imeb+a4pe3uaaaaasuvork5cyii=
ak0nfwmwb8waaaaasuvork5cyii=

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I want to create tally net id

Hi,

Please follow the below step for create tally.net id.

Step 1: Go to Gateway of Tally

Step 2: Press Ctrl+K

Step3: The Remote Login screen is displayed.

Step4: Enter the required Account ID in the Your E-Mail ID field and Password in your Tally.Net Password field. The password is sent by e-mail separately to the email address provided while activating Tally.ERP9.

Step 5: Press Enter.

(The Control Center Screen appears as displayed.)

In the Control Center Screen:

- Select My Tally.Net Accounts.

- The My Tally.Net Accounts screen is displayed.

- Press Enter.

- You can see Control Center Screen

- Select User Management (Press Enter)

- Feed details related of the Account ID

Tally.Net Users, execute the following steps:

- Select Standard User from the list of Security Level.

- Enter the required Email ID for the remote Tally.Net User in Tally.Net ID field and press enter.

- Select the Status from the List of Status.


- Select End of List.

- Accept to save

thanking you

davevipul197
0helpful
1answer

How to create tally.net id please tell me

Hi,

Please follow the below step for create tally.net id.

Step 1: Go to Gateway of Tally

Step 2: Press Ctrl+K

Step3: The Remote Login screen is displayed.

Step4: Enter the required Account ID in the Your E-Mail ID field and Password in your Tally.Net Password field. The password is sent by e-mail separately to the email address provided while activating Tally.ERP9.

Step 5: Press Enter.

(The Control Center Screen appears as displayed.)

In the Control Center Screen:

- Select My Tally.Net Accounts.

- The My Tally.Net Accounts screen is displayed.

- Press Enter.

- You can see Control Center Screen

- Select User Management (Press Enter)

- Feed details related of the Account ID

Tally.Net Users, execute the following steps:

- Select Standard User from the list of Security Level.

- Enter the required Email ID for the remote Tally.Net User in Tally.Net ID field and press enter.

- Select the Status from the List of Status.


- Select End of List.

- Accept to save

thanking you

davevipul197
0helpful
1answer

Printing quality is very poor

The print quality of dat matrix printers depends upon the printer ribbon. If the ribbon is old or worn out then the print will be very light. In this case replace the ribbon.
Dot matrix printers are very old technology and I suggest you get a Inkjet printer or a laser printer.
Dot matrix printers cannot match the print quality of Inkjet and laser printers.
1helpful
1answer

How to increase the speed of Dot Matrix Printer using CrystalRpts

In the .rpt file select the printer fonts (they will have a printer icon next to them). These will print faster than truetype fonts.
6helpful
1answer

HEN I WAS OPENING TALLY ERP 9 I HAVE BEEN FACING

Step 1
Windows Key+R
in the Run Box
Type your Tally Folder Path as following 
Eg. D:\Tally.erp9\tally.exe data 0
when open Tally Getway
use Ctr+Alt+R
Rewrite All Company

Enjoy....

IF Problem is same
then in the data folder company number folder
delete all tsf file and attem step 1 again 

Problem is 100% solved.

AYS, Beawar, 
Thanks to Mir -- Manish JI Garg..
3helpful
2answers

Difference between dot matrix printer and laser printer

1. Dot matrix as the name suggests prints in small dots. The print out u get in railway tickets. 2. Laser printers are very speedy and have clear and sharp printing. There is no comparison b/w a laser printer and dot matrix. If dot matrix is 1st GEnaration than laser is atleast 10 generations ahead
0helpful
2answers

Cross printing

I'm not sure exactly what your issue is, but Epson printers should be well supported as far as drivers are concerned. Do you have the correct driver loaded? If you are trying to use a Tally driver with the Epson printer, this may not work right.

Also, when printing from Windows, some older printers print only in a single direction, from left to right, instead of bi-directional (left to right & right to left).

I've used a few different Epson dot matrix printers, and problems have been few.
4helpful
2answers

Hammer voltage 2

it prints for about two minutes then starts slowing down and then stops printing showing an error of : hammer voltage 2
Not finding what you are looking for?

295 views

Ask a Question

Usually answered in minutes!

Top Tally Office Equipment & Supplies Experts

NOEL
NOEL

Level 3 Expert

8606 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66838 Answers

Are you a Tally Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...