Error number 6A80 for pixma canon 4700 how to fix it?

Hello friend,
APP position error or Error Code 6A80
Condition: An error occurred in the APP motor.
Problems and Solutions:

• Check for foreign material or paper debris around the purge drive system unit
  - remove foreign material.
• Check for foreign material or paper debris around the ASF unit
  - remove foreign material.
• If other solution fail, replace one off the following part
  - Purge drive system unit
  - Logic board

From http://pcmediks.blogspot.co.uk/2010/11/canon-pixma-error-codes-and-solution.html

See Canon's web-site:

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip3600?CMD=MIXED_SEARCH&mName=PIXMA+iP3600&mType=PIXMA+iP&pageKeyCode=ekbresults&searchString=flashing&BASIC_SEARCH_CURRENT_TOPIC_ID=1506&BASIC_SEARCH_CURRENT_TOPIC_TYPE=0&RESULTS=RELEVANCE&RELEVANCE_START=1&RELEVANCE_COUNT=25&CONFIGURATION=1011&PARTITION_ID=1&TIMEZONE_OFFSET=null&USERTYPE=1&isSecure=false

after counting the number of flashes. The number of flashes will identify the problem.

Cannon IP3680 service error 6A80 Solved Problme

Salut anna14029
Diverses solutions sont proposees ici : http://fix-your-printer.blogspot.com/2009/06/error-code-6a80-on-canon-printers.html .
Je reste a ta dispo notamment pour les traductions , si necessaire .
Cordialement ,
fanaudi

I have pixma ip3600 canon printer, been used 8months working fine, but today, when I turn on just wait for little whileand the amber light turn on, and when I open thetop cover the printer head won't move at all, please show me how to fix the problem. thanks. Email ( [email protected] )

Hi, That error may cause of a paper jam, check your printer if there is blockage and then remove those blockage if no blockage, and the error still appear try to reset your printer.
To reset follow this:
1. Turn off the printer.
2. Pressed simultaneously for 10 seconds on the following buttons:
3. Release the button "On / Off".
4. After a few seconds release the other buttons.

Thank you for using FixYa

This should do it

http://fix-your-printer.blogspot.com/2009/06/error-code-6a80-on-canon-printers.html

That error says there is something jammed in either the purge assembly or the sheet feeder on the back not able to turn. The purge assembly is on the right where the printhead parks for cleaning.

Hi,

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Error 6A80 – means “AP position error”- indicates that "an error occurred in the APP motor during purging operation". Either the sheet feed unit, purge unit, or logic board could be at fault.

I'd recommend bringing the unit into your local canon authorized service facility for complete diagnostic and repair.


Hope this helps

Error 6A80 indicates that "an error occurred in the APP motor
during purging operation". Either the sheet feed unit, purge unit, or logic board could be at fault.

I'd recommend bringing the unit into your local canon authorized service facility for complete diagnostic and repair.