Open the printer as if to replace an ink cartridge. On the print head there is a black plastic arm about 2 inches long. Re-connect this with the white cog wheel so that the protruding part is in the center of the black arm. Close lid, power on and job done.
I have the same error 0xc05d0281 .and in the print head you sea the black parte atach to a gear. and then on the top to white plastic. ok i notece one is break and i repear the part whit super glue and the error go off. the go under the metal part. sorry my inglish i am from mexico if you whant pics sendme email [email protected]
Você coneguiu, como
SOURCE: Ink system failure
Try the following reset:
Hold the OK and the Help button at the same time. While holding them down, plug
the power in. Continue to hold both buttons until the unit shut off.
After shutting down, release both buttons and power on the printer.
Alternatively follow instructions on this document from HP.
4,241 views
Usually answered in minutes!
i have the same problem. yatin
recharged changed inks, and tried all to eliminate the ink system failure of 0xco5d2281 but nothing has worked. Wondered what is the solution.
Ink system failure. Ink system has failed. Unable to copy, receive faxes, or print. Refer to printer documentation. Error: 0xca0007
Ink system has failed. Unable to copy, receive faxes or print.
Refer to printer documentation. Error: 0xc05d0281
I have a problen with my HP Photosmart 3310.
It shows me : 0 xc19a0013.
What can i do ?
Thanks for help.
Hanno
I also received error 0xc05d0281 on my Photosmart 6180.
Can you help me out also? Thanks... Joe
this is [email protected] i have a photo smart 3310 aa in one i installed new ink catridges and an error came up saying [error;oxc18A0206 ]now i cant fax print scan or copy can you help?
Ink system has failed.
Unable to copy, receive
faxes or print. Refer to
printer documentation.
error: 0xc19a0013
Press OK
have the same problem but on mine it scans but does not print any thing at all. instead it displays the error
×