In the display window it says UPD5/5 - Panasonic SC-BT200 Home Theater Systems. Single-disc 1000W Blu-ray Disc home theater system

To change your Windows display language, follow the instructions mentioned on the link below:
For Windows 8.1:
http://windows.microsoft.com/en-in/windows-8/using-multiple-languages
For Windows 7:
http://windows.microsoft.com/en-in/windows7/install-or-change-a-display-language
For Windows Vista:
http://windows.microsoft.com/en-in/windows-vista/change-the-display-language

GuruAid.com

You can change the display language of your Windows by following the guidelines mentioned on the links below:
For Windows 8.1
http://windows.microsoft.com/en-in/windows-8/using-multiple-languages
For Windows 7
http://windows.microsoft.com/en-in/windows7/install-or-change-a-display-language
For Windows Vista
http://windows.microsoft.com/en-in/windows-vista/change-the-display-language

GuruAid.com

The IBM ThinkPad Z61t computer runs the Windows operating system. Normally, Windows is displayed on a monitor in a manner that makes it easy to read. If you want to change the screen display configuration (from vertical to horizontal), modify the screen display properties in Windows itself. This process causes the computer to rotate the image displayed on the screen by 90, 180 or 270 degrees, depending on the setting you choose.

1.Right-click on an empty portion of the Windows desktop on the Z61t.

2.Click "Properties."

3.Click "Display."

4.Click "Change display settings."

5.Click the "Orientation" drop-down window. Select the "Landscape" option to make the screen display items in a horizontal manner.

How to use the function (Fn) keys on the keyboard - ThinkPad T40, T40p, T41, T41p, T42, T42p, T43, T43p


Switching the display output location.
Switch between the computer display and an external monitor. If an external monitor is attached, the computer output is displayed in the following three patterns by turns:

• External monitor (CRT display)
• Computer display and external monitor (LCD + CRT display)
• Computer display (LCD)

Notes:

• For any operating system other than Windows 2000 or Windows XP, no additional procedure is needed. Just press Fn+F7.
• This function is not supported if different desktop images are displayed on the computer display and the external monitor (the Extend desktop function).
• This function does not work while a DVD movie or a video clip is playing.

To enable this function in Windows 2000 and Windows XP, the following procedure is needed:

1. When you log on to Windows 2000 and Windows XP for the first time, press Fn + F7 and select a display-switching function in the Initial setup window. Since in Windows 2000 and Windows XP multiple users can log on to a single operating system by using different user IDs, each user needs to select the function in the initial setup window when logging on for the first time.
2. If the Fn + F7 key combination have been assigned to a presentation scheme function, start Presentation Director, and change the settings.

Press the F8 key when windows is booting up from a power off situation, select "safe Mode" you should get a Display then,(NO Video driver(except windows generic) driver is load in safe mode). Set your display to the LOWEST resolution.. Reboot. See if you have a display with the driver set Low. If so, increase the resolution on level at a time until you encounter a problem. If you do not select Yes when windows asks if you want to keep this display setting, Windows will revert back to the last setting you selected yes for.