As soon as i lifted the top of the Maytagg 2000 to see if i could remove some of the degree in the cot & cold pipe i noticed that a switch/sensor was hanging. My "NF" code was because of a sensor/switch that fell off the wall of the washing machine. when it fell it must have got lodge between the tub and the wall and cut a wire. I bypassed the cut wire by running it directly to the switch/sensor but keep in mind that it was sunday and we haven't don laundry for a week and come monday i will seek the propped part for a permeant fix """DO NOT ATEMPT THIS IF YOU HAVE NO CLUE WHAT YOU ARE DOING. in conclusion some times look for the obvious.
Hi
Thanks for using FixYa. Error NF
means No Fill. The washer has tried to fill but was unsuccessful. NF indicates
No Flow. There is something that is interrupting the inbound flow
of water to the washer, either hot or cold. Sometimes this happens
when water service in the area is interrupted, creating an air pocket that
causing the water valve not to sense water.
Try running the diagnostic test byā
Please do rate the solution if the
issue is resolved or post a comment for further assistance.
Thanks
Rylee
Hello & Welcome to FixYa
NF error in your Maytag is
displayed due to no fill condition, when the washer tries to fill but is unable
to nf is displayed. Please check the water inlet valve for any clogs and
obstructions, you can also clean the inlet to solve the issue. Please get back to me if you have any
other questions.
Kevin
Hello & Welcome to
FixYa
NF error in your washer is displayed due to no fill condition,
when the washer tries to fill but is unable to nf is displayed. Please check
the water inlet valve for any clogs and obstructions, you can also clean the
inlet to solve the issue. Please
get back to me if you have any other questions.
Kevin
780 views
Usually answered in minutes!
×