Send/Receive Error with Outlook 2002

Reset the router with the pin hole on the back,

Ask COMCAST for the names of their POP-server and of their MAIL-server, and configure Outlook Express to use those names.

Microsoft Live Mail is "web-based" -- all you need to do is to web-surf to their web-site, login, and click "send/receive" or click "compose" and later "send".

In outlook express go to account setting and in account properties choose the connection tab in connection type choose the option any connection available and in your send and receive setting remove the tick hang up after send and receive done.

Here's a link to the Linksys site and the downloads you need. Choose version 2.0 and you will see the downloads available...

http://www.linksysbycisco.com/US/en/support/BEFSR41/download

It wont work , as its MAC address will not be validated from the Head End MUX from operator.

Since you did not include your exact model number and type of internet provider I cannot give you more specific instructions. Although you can refer to the links below on how to set it up. If you require further assistance just reply to this and give me the model number of your ISP and the model of your router. Also answer this question " When you plug your computer to your modem do you get online automatically or do you need a username and password"

DSL

Cable

check this link if your internet provider is cable http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4747&p_created=1166681481&p_sid=KbRQOM6j&p_accessibility=0&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NDI3JnBfcHJvZHM9MCZwX2NhdHM9MTcyMSwxNzIzJnBfcHY9JnBfY3Y9Mi4xNzIzJnBfc2NmX2xhbmc9MSZwX3BhZ2U9MSZwX3NlYXJjaF90ZXh0PWNhYmxl&p_li=&p_topview=1

check this link for dsl internet connection
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3687&p_created=1151389425&p_sid=KbRQOM6j&p_accessibility=0&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9ODkmcF9wcm9kcz0wJnBfY2F0cz0xNzIxLDE3MjMmcF9wdj0mcF9jdj0yLjE3MjMmcF9zY2ZfbGFuZz0xJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9ZHNs&p_li=&p_topview=1

hope that helps........

Try to access the router's setup page and change the MTU settings. The default address for the Befsr41 is 192.168.1.1. Here are instructions:

1) Use a computer wired to the router.
2) Launch a browser and type in 192.168.1.1, leave the username blank and the password is admin or the password you have set when you first configured the router.
3) Click on the Advanced tab then click on the Filters tab. On the bottom part you have MTU.
4) Enable that option and set MTU to 1500, 1400, 1300 (for cable ISP connection) and 1492 (for DSL connection) and check if it will work.
4) If that does not work, you can try upgrading the firmware of your router.

Just use the link below which I provided for you...

http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1166859876500&packedargs=sku%3DBEFSR41&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=7650076500B01&displaypage=download#versiondetail

It should bring you to the Linksys support site for your product. Hope this solves your problem...Good Luck

You don't need drivers for a router.