At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Error B200 is a print head overheat error. Just need a new printhead. You should see the power and alarm lights flash on and off 10 times then repeat the cycle. That's confirms the fault more than the error code. Its very simple to fit a head, just be careful putting the new one in as it's easy to break the pins in the carriage. No force is needed when fitting the head. Just let it drop in and lock the lever. Try taking out the old head first and gently clean the contacts at the back as they can rarely make poor contact with the carriage pins.
Good luck
After looking at some information about the printer error and that the error tells you to "contact the service center" I have given you places to contact about this error. Some of the information that I have looked at about the error said that several things can cause the error. I suggest that you contact Cannon through the 'Email Assistance'.
If you are giving the error as 46 see below the error chart fix. I hope this gets you going and thanks for using Fixya. The number is 800-284-4329 What the error is saying is shown below. I copy and pasted so let me know if it doesn't show up for you and thanks for using FixYa.
Error 46 Ink absorber pad is full...replace it contact brother customer service.
46
The ink absorber pad is full and needs replacing.
Please contact Brother Customer Service from "Contact Us".
Welcome toFixYa
Dear user
You have to Re flash your Phone if its due to Software damage. Some times hardware Error also leads to this trouble.RPL file damage also makes this error to phone. Its better to give authorized service center if you are under warranty.
Contact service will shows in some models due to water damage...
Thanks for Connecting FixYa...
I think you mean "contact service" error message, if this is the problem, then this is the biggest problem with every mobile. You first need to check it in software and see whether it can boot from the software. (better get it repaired by an experienced technician)This problem is mostly caused by database corrupt(software/firmware) and cpu failure.. Good luck..
Hi!
It's flash error. Could be a dead flash fuse on the main board or bad flash board. Contact your local Sony service center, but
if they ask too much, you can contact me at [email protected]
and I will give you a good price.
I work in Sony service center.
I understand that this errors occurs in POST mode. You can always refer to service manual or troubleshooting guide of your machine upon purchase especially it displays error code. However not all error codes are not servicable for ordinary users due to risk. To give you an idea in solving the problem; present this error code to authorized service center and offer them to purchase the defective parts regarding this error, or you can troubleshoot by detaching or removing running parts one at a time. We'll see if the error changes. Contact me if there are progress, I can help you pin-point the problem somehow I can resell parts soonest with this type of printers.
×